Essays about: "Compactor"
Showing result 1 - 5 of 7 essays containing the word Compactor.
-
1. Value and sustainability design concept assessment using Discrete Event Simulation : A case in the road constructor sector
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : This master thesis has been performed in association with Blekinge Institute of Technology and in collaboration with the company Dynapac Compaction Equipment AB. The thesis aims to investigate how Discrete Event Simulation (DES) can be used for value and sustainability design concept assessments in early design stages. READ MORE
-
2. Compressible Waste Bin System for Public Environment : Design with a User-Centred Approach
University essay from Luleå tekniska universitet/Institutionen för ekonomi, teknik och samhälleAbstract : We consume more and more which also have led to an increase in the waste we most handle. In public environment, common solution have been to increase the size of the waste bin, but that’s not always an option. To big and it may interfere with the environment it placed in. READ MORE
-
3. Spatial vibration measurements : operating deflection analysis on the example of a plate compactor
University essay from Linnéuniversitetet/Institutionen för maskinteknik (MT)Abstract : The operating motion of a ground compactor uses high power vibrations to improve mechanical properties of a compacted ground. This motion gives a good base for the vibration analysis with an aid of Signal Processing. In this thesis, the motion of a bottom plate in a compactor is of the main interest. READ MORE
-
4. Geogrids in cold climate : Temperature controlled tensile tests & Half-scale installation tests at different temperatures
University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserAbstract : Due to the findings of extensive damage on geogrids used in a road embankment in northern Sweden, the Swedish Transport Administration (TRV) started to investigate the reason of these damages. Since the geogrids were installed at low temperature, below 0°C, it was suspected that the damages were connected the low temperature. READ MORE
-
5. The effect of filler type and shape on HMA energy dissipation performance.
University essay from KTH/Väg- och banteknikAbstract : Hot mix asphalt pavements require adequate compaction to achieve the required density to resist rutting. The amount of energy required to achieve the optimum degree of compaction depends on the type of gradation, bitumen content, filler type and shape, type of compaction equipment etc. READ MORE