Advanced search
Showing result 1 - 5 of 13 essays matching the above criteria.
-
1. Feasibility Study of Wind Turbine Blades Constructed in 1300 MPa Fossil-Free Steel : Finite Element weight optimization with respect to structural integrity by Abaqus and Tosca Structure
University essay from Linnéuniversitetet/Institutionen för maskinteknik (MT)Abstract : This study aims to perform a feasibility study on the DTU 10MW-RWT wind turbine blades constructed in the fossil-free high-strength steel 1300 MPa from SSAB. The acceptance criteria, on which the study is based, are taken from the DTU composite wind turbine model. A maximum weight of 41 000kg and a maximum tip displacement of 12.5 m are chosen. READ MORE
-
2. A strategy for improving reliability in assembly processes
University essay from Mälardalens högskola/Akademin för innovation, design och teknikAbstract : This report presents an explorative examination of the scientific literature regarding current methods utilized in mixed-model assembly lines and the challenges that are faced. Empirical data from a real mixed-model assembly line was collected and analyzed to explore the application of the identified methods and the problems that are faced in a realistic situation. READ MORE
-
3. Lean Six Sigma for In-Process Quality Improvement : Case Study of a Battery Cell Production Process
University essay from Mälardalens högskola/Akademin för innovation, design och teknikAbstract : Purpose The purpose of this thesis is to investigate the efficiency and performance of Quality control with focus on the inspections performed within production processes and how Lean Six Sigma can affect them. This can be done through mapping a current state to identify inefficiencies and wastes. READ MORE
-
4. Systematic optimisation of an existing fuel oil preheating system : Facilitating replacement of 5000 cSt oil with 74 500 cSt
University essay from Linnéuniversitetet/Institutionen för maskinteknik (MT)Abstract : In order to increase the efficiency of a preheating system as temperatures increase, without using seawater as a coolant, an additional heat exchanger is required to be installed into the system. The purpose of the study is therefore to investigate how the temperatures of fuel oils can be increased while minimising the loss of energy and costs. READ MORE
-
5. Manufacturing process re-engineering of a production line through Industry 4.0 to obtain the best quality and reduced wastes: the case in projection welding
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : Background This research study is in collaboration with the Blekinge Institute of Technology and Volvo Cars Body Components (VCBC). VCBC is a car manufacturer that manufactures car body components in Olofström, Sweden. READ MORE