Essays about: "beam position"

Showing result 1 - 5 of 97 essays containing the words beam position.

  1. 1. FE-Modelling of Composite Girder tests

    University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Author : Holger Berggren; Bergstedt Ola; [2024]
    Keywords : shear connector; post-installed; coiled spring pins; composite girder; partial composite action; finite element method;

    Abstract : Many of the existing steel-concrete bridges may need to be strengthened, as heavier vehicles areallowed on the Swedish roads. These bridges could possibly be strengthened by post-installingshear connectors. The shear connectors may enhance the load-bearing capacity through a higherdegree of composite action between the steel and concrete interface. READ MORE

  3. 2. Drop-weight impact tests on reinforced concrete beams

    University essay from KTH/Betongbyggnad

    Author : John Abdalnour; Milad Saliba; [2023]
    Keywords : ;

    Abstract : This master's thesis aimed to investigate the behaviour of reinforced concrete beams under dynamic loading conditions, specifically focusing on understanding shear failure. The study was conducted with KTH Royal Institute of Technology, the Swedish Fortifications Agency, and Tyréns. READ MORE

  4. 3. Developing an ML-based model for RF tuning of the DTL machine at ESS

    University essay from Lunds universitet/Institutionen för reglerteknik

    Author : Amin Hosseini Nejad; [2023]
    Keywords : Technology and Engineering;

    Abstract : The European Spallation Source (ESS) infrastructure is being constructed in Lund, and will be one of the most powerful research facilities of its type in the world. The ESS linear accelerator (linac) utilizes different accelerating sections where a wide variety of techniques should be employed to accelerate a beam of protons to 2 GeV kinetic energy through Radio Frequency (RF) cavities before being collided with a tungsten target for the final production of neutrons, through the process of spallation. READ MORE

  5. 4. Optimization of Gammasphere Data Following the Nuclear Reaction 36Ar + 24Mg → 60Zn∗

    University essay from Lunds universitet/Fysiska institutionen; Lunds universitet/Partikel- och kärnfysik

    Author : Paul Böhm; [2023]
    Keywords : re-calibration; Gammasphere; 54Fe; Physics and Astronomy;

    Abstract : The experiment at Argonne National Laboratory aimed to study the fusion-evaporation reaction following the collision of a high-energy particle beam of 36Ar with a stationary target of 24Mg. This paper outlines the creation and implementation of an automated re-calibration procedure for the high-purity Germanium detectors comprising the Gammasphere array used for γ-ray spectroscopy in this experiment. READ MORE

  6. 5. Cavity Beam Position Monitors State of the Art and Design Studies in the Context of the ILC Project

    University essay from Lunds universitet/Partikel- och kärnfysik; Lunds universitet/Fysiska institutionen; Lunds universitet/Lunds Tekniska Högskola

    Author : Laura Karina Pedraza Motavita; [2023]
    Keywords : Technology and Engineering;

    Abstract : The aim of this master thesis project is the study and evaluation of the design of cavity beam position monitors (BPM) for the International Linear Collider (ILC) project. The state-of-the-art of BPMs is investigated to determine the most appropriate existing BPM design for the requirements of the ILC. READ MORE