Essays about: "dissertation on software engineering"

Showing result 1 - 5 of 13 essays containing the words dissertation on software engineering.

1. 1. CALFEM Geometry Editor - Implementing an interactive geometry editor for CALFEM

   University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaper

   Author : Karl Eriksson; [2021]
   Keywords : Technology and Engineering;

   Abstract : Commercial finite element codes are designed with a wide variety of tools and options to suit the needs of many different applications. However, in a teaching setting this is not always desirable as the effort required to learn the software draws focus and time from the teaching of the theoretical concepts. READ MORE

3. 2. Modelling and simulation of vibratory driven sheet piles - Development of a stop criterion

   University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaper

   Author : Johannes Jonsson; Anton Andersson; [2021]
   Keywords : Vibratory driving; sheet pile; Technology and Engineering;

   Abstract : During excavations, steel sheet piles are often installed through vibratory driving, to establish a retaining wall that resists soil instability and ground water leakage. The method of vibratory driving is that the sheet pile is driven into the soil with a vertical vibratory motion. This is especially effective in soft soils. READ MORE

4. 3. Simulation of GPHE diagonal based on full material history

   University essay from Lunds universitet/Institutionen för byggvetenskaper; Lunds universitet/Hållfasthetslära

   Author : Anna Gunnarsson; Jenny Hoang; [2021]
   Keywords : Technology and Engineering;

   Abstract : The objectives for this thesis is to further develop a finite element analysis methodology where the material history is evaluated in every step. The processing of the plate from coil to fully formed plate mounted in a heat exchanger should be taken into consideration. Material phenomena such as necking and springback are important to capture. READ MORE

5. 4. Modelling cross-laminated timber floors in dynamic analysis - Eigenfrequency prediction

   University essay from Lunds universitet/Institutionen för byggvetenskaper; Lunds universitet/Byggnadsmekanik

   Author : Johannes Wetterholt; [2019]
   Keywords : finite element method; FEM; dynamic analysis; Eigenfrequency; CLT; cross-laminated timber; cross-laminated timber floors; wooden floors; Technology and Engineering;

   Abstract : In the late 1990s cross-laminated timber (CLT) was developed. The development of CLT was a project aimed to produce a structural product that could compete with the concrete industry and contribute to a reduced effect on the environment, due to the low environmental impact of timber in relation to other building materials. READ MORE

6. 5. Implementation of inverse motion form finding in commercial software

   University essay from Lunds universitet/Hållfasthetslära

   Author : Sean Mooney; [2018]
   Keywords : Inverse motion; finite element method; FEM; FEA; Technology and Engineering;

   Abstract : This Masters' dissertation investigates the possibility of implementing the concept of inverse motion form finding in a commercial software. The inverse motion approach finds the initial, undeformed geometry of a design such that it obtains its desired design shape when service loads are exerted on the design. READ MORE