Essays about: "example technology thesis"

Showing result 1 - 5 of 1529 essays containing the words example technology thesis.

1. 1. Real-Time System Benchmarking with Embedded Linux and RT Linux on a Multi-Core Hardware Platform

   University essay from Linköpings universitet/Institutionen för datavetenskap

   Author : Kian Hosseini; [2024]
   Keywords : Real-time; Embedded systems; Benchmarking; Multicore;

   Abstract : To catch up with the growing trend of parallelism, this thesis work focuses on the adaption of embedded real-time systems to a multicore platform. We use the embedded system of Xilinx ZCU-102, a multicore board, as an example of an embedded system without getting deep into its architecture. READ MORE

3. 2. Potential and Limitations of the Sketch Map Tool in the International Red Cross Red Crescent Movement

   University essay from Lunds universitet/Avdelningen för Riskhantering och Samhällssäkerhet

   Author : Kimon Letzner; [2024]
   Keywords : Disaster risk reduction; Participatory action research; Community risk mapping; International Red Cross Red Crescent Movement; Colombia; Technology and Engineering;

   Abstract : In disaster risk management, participatory mapping (PM) closes spatial data gaps in communities by integrating local risk knowledge. The thesis examined the potential and limitations of the Sketch Map Tool (SMT) as a PM tool for community-based disaster risk reduction (DRR) through an International Red Cross Red Crescent Movement case study. READ MORE

4. 3. Techno-Economic Analysis of Dye Separation in Textile Recycling

   University essay from Lunds universitet/Avdelningen för Teknisk vattenresurslära

   Author : David Lundberg; [2024]
   Keywords : Dye; Membrane filtration; Electrocoagulation; Techno-economic analysis; Pre-feasibility study; Technology and Engineering;

   Abstract : This study determines the technical and economic feasibility of separating dye from a process filtrate in industrial textile recycling using electrocoagulation or sequences of membrane filtration with microfiltration, ultrafiltration, nanofiltration and reverse osmosis. The lower requirements for treating this stream, compared to previously researched dyehouse effluents, left treatments not good enough for dyehouses viable for this process filtrate. READ MORE

5. 4. Test Equipment for the LUCAS Chest Compression System: Incorporating Biomechanical Insights for Future Design Enhancements

   University essay from Lunds universitet/Avdelningen för Biomedicinsk teknik

   Author : Ester Pörtfors; Malin Svärdling; [2024]
   Keywords : Mechanical CPR; Cardiopulmonary Resuscitation; LUCAS Chest Compression System; Test Equipment; Chest Biomechanics; Chest Stiffness; Technology and Engineering;

   Abstract : The LUCAS Chest Compression System is a market leading mechanical cardiopulmonary resuscitation device, assisting medical professionals worldwide when treating patients with sudden cardiac arrest. The objective of this master thesis project was to develop a new, adjustable test equipment for the LUCAS device, allowing for tests on varying chest heights and stiffness levels. READ MORE

6. 5. Effective Digitization in Brownfield Factories : A conceptualized model for technology transfer to brownfield production factories through smart factory lab

   University essay from KTH/Produktionsutveckling

   Author : Harshavardhan Gajanan Naik; [2024]
   Keywords : Digitalization; Industry 4.0; Technology Transfer; Virtual Training; Browneld Factories; Process;

   Abstract : The exploration of Smart Factories and Industry 4.0 technologies has indeed sparked curiosity and interest in the industrial world. The potential of these advancements to revolutionize manufacturing processes, enhance efficiency, and drive innovation is immense. READ MORE