Essays about: "hull structure design"
Showing result 1 - 5 of 15 essays containing the words hull structure design.
-
1. Sensor system for pressure measuring over a sail : Construction and implementation of a sail pressure measuring system
University essay from KTH/Skolan för elektroteknik och datavetenskap (EECS)Abstract : Wallenius Marine, KTH and SSPA are working together on a wind powered car carrier, that will ship cars over the atlatic. KTH has a small scale prototype of this vessel, and uses this prototype to test performance and new sensor systems, that can be used on the full scale vessel. READ MORE
-
2. Design of Nose-cone for Autonomous Underwater Vehicle
University essay from Lunds universitet/InnovationAbstract : The goal was to perform a feasibility study on an additive manufactured thermoplastic nose-cone hull design for an autonomous underwater vehicle SAM. Where feasibility includes the technical, economic and sustainable aspect in the analysis. READ MORE
-
3. Strength assessment of rig foundations for a sailing car carrier
University essay from KTH/LättkonstruktionerAbstract : The wPCC project (wind powered car carrier) is carried out by Wallenius Marine, KTH Royal Institute of Technology and SSPA Sweden. By developing a car carrier mainly propelled by the wind, the emissions are estimated to be reduced by up to 90 %. This thesis deals with the structural aspects of the design. READ MORE
-
4. Design and Evaluation of V/UHF Satellite Communication Antennas for Naval Applications
University essay from KTH/Elektroteknisk teori och konstruktionAbstract : In this master thesis, compact antenna design aimed towards naval applicationshave been designed, analyzed and evaluated. There is a recentinterest in the development of compact antennas to be used for smallersubmarine models, and with a smaller hull on a submarine, communicationand antenna systems must be adapted and minimized, which limitsantenna design. READ MORE
-
5. Design and manufacture of structure and hull for large AUV
University essay from KTH/Marina systemAbstract : The main goal with the master thesis was to design and manufacture a frame and hull to a large AUV which KTH will use in research. The general aim for the Maribot LoLo (Long Endurance, Long Range AUV) is to act as an experimental platform and tool for a wide range of research activities, where all four capabilities within the SMaRC area (Autonomy, Perception, Endurance and Communication) can be tested, improved and demonstrated. READ MORE