Essays about: "mathcad"

Showing result 1 - 5 of 11 essays containing the word mathcad.

  1. 1. Stray capacitance study for HVDC Classic : The use of PSCAD and Mathcad to calculate the equivalent stray capacitance

    University essay from Uppsala universitet/Elektricitetslära

    Author : Saga Dalersand; Fredrik Gjöthlén; [2023]
    Keywords : ;

    Abstract : The reactors placed in the thyristor valve designed by Hitachi Energy have reactor losses which are dependent on the stray capacitance. To find out the stray capacitance, and further get to know the reactor losses, a PSCAD simulation is performed. READ MORE

  3. 2. Laminated veneer lumber floor : An evaluation of performance

    University essay from KTH/Bro- och stålbyggnad

    Author : Lisa Nuszkowski; Mylan Tran; [2022]
    Keywords : ;

    Abstract : The ongoing climate change has become a very discussed and accurate topic. A fifth of the Swedishemissions of greenhouse gases originate from buildings (Boverket, n.d). READ MORE

  4. 3. Pile subjected to lateral load : Analytical hand calculation implemented by programming

    University essay from KTH/Byggteknik och design

    Author : Anders Nordlöf; Danny Holmboe; [2021]
    Keywords : Commission on Pile Research; report 101; pile foundation; transversely loaded piles; interaction pile soil; Mathcad; hand calculation method; Pålkommissionen; rapport 101; pålgrundläggning; transversalbelastade pålar; interaktion påle-jord; Mathcad; handberäkningsmetod;

    Abstract : The official recommendations in geotechnical engineering are according to Swedish practice to install inclined driven piles in order to resist external horizontal loads, which usually consist of windloads. These loads gets counteracted by utilizing the pile's axial load-bearing capacity, however when designing a foundation the use of inclined piles has proven to be problematic from a number of different perspectives. READ MORE

  5. 4. Design of column bases concerning bending and shear nibs

    University essay from KTH/Byggteknik och design

    Author : Rodi Kay; [2021]
    Keywords : Column bases; Pelarfötter;

    Abstract : The purpose of the thesis is to find out how to design column bases with conventional methods presented by European standards and codes, but above all from the Steel Construction Institute's handbook on structural joints and compare it with finite element analyses. However, today there are no good instructions for how column bases exposed to multiaxial bending should be designed, where assumptions based on structural mechanics also was compared with computer tools. READ MORE

  6. 5. Structural Assessment of the Glulam Arches at Stockholm Central Station

    University essay from KTH/Byggnadsmaterial

    Author : Anders Naumburg; Kasper Krönlein; [2020]
    Keywords : Wood; Glulam; Glulam-arch; Hetzer system; Töreboda system; AB Fribärande träkonstruktioner; Curved I glulam cross-sections;

    Abstract : The purpose of this master’s thesis was to investigate if suspension of heavy objectsis possible in the glulam arches at Stockholm Central Station. The main goal was todetermine the arches’ load carrying capacity’s utility ratio, in order to give knowledgeif additional loading can be added. READ MORE