Essays about: "micro milling"

Showing result 1 - 5 of 8 essays containing the words micro milling.

  1. 1. Experimental studies of radiation damage in uranium nitride

    University essay from KTH/Fysik

    Author : Maria Giamouridou; [2023]
    Keywords : uranium nitride nuclear fuel; advanced nuclear fuel; uranium nitride fabrication; uranium nitride characterisation; Spark Plasma Sintering; proton irradiation; irradiation damage; TANDEM accelerator; irradiation induced cracking; irradiation induced hardening; irradiation induced swelling; hydrogen implantation; dislocation loops; kärnbränsle av urannitrid; avancerat kärnbränsle; tillverkning av urannitrid; karakterisering av urannitrid; Spark Plasma Sintering; protonbestrålning; strålningsskador; TANDEM-accelerator; strålningsinducerad sprickbildning; strålningsinducerad härdning; strålningsinducerad svällning; väteimplantation; dislokationsloopar;

    Abstract : The effect of proton (H+) irradiation on uranium mononitride (UN) and UN compositefuel with 10 at.% ZrN (UN10at%ZrN) was examined. Protons of 2 MeV with fluences of1E17, 1E18, 1E19 and 1E20 ions/cm2 were accelerated towards the fabricated samples in orderto investigate the evolution of the micro-structure. READ MORE

  3. 2. Design of a braiding machine : For micro-tubing used in reconfigurable fluidic wearables

    University essay from Uppsala universitet/Industriell teknik

    Author : Andreas Rishaug; Joakim Sandberg; [2022]
    Keywords : braid; braiding; braiding machine; Omnifibre; CNC; computer numerical control; CAM; computer aided manufacturing; manufacturing; milling; turning.;

    Abstract : In this project the objective is to understand how to design a braiding machine capable of automated production of Omnifibre in a research environment. Automated production of Omnifibre is the key issue for the researchers as they want to increase the weaveabilty of the fibers and make it more suitable for use in active textiles. READ MORE

  4. 3. Variations in material properties of grey cast iron and its impact on tool wear

    University essay from Lunds universitet/Industriell Produktion

    Author : Andreas Söderholm; [2021]
    Keywords : Grey cast iron; hard inclusions; tool wear; machinability; graphite structure.; Technology and Engineering;

    Abstract : Among cast materials, grey cast iron and ductile iron makes up about three quarters of all cast parts. This makes the manufacturing and machining of grey cast iron an important economical factor for the automotive industry. READ MORE

  5. 4. Dispersion of cement-based grout with ultrasound and conventional laboratory dissolvers

    University essay from KTH/Byggvetenskap

    Author : Antranik Karamanoukian; [2020]
    Keywords : ultrafine cement grout; microfine cement grout; dispersion; additives; ultrasound dissolver; laboratory dissolver; ultrafint cementbruk; mikrofin cementbruk; dispergering; tillsatser; ultraljud apparat; laboratorieblandaren;

    Abstract : In any underground facilities especially tunnels, it is essential to seal the area against water ingress and leakage of reserved materials. Grouting is a common method used to seal rocks around tunnels, successful grouting reduces the duration and cost of the construction, guarantees better working environment and higher safety, minimizes the maintenance and most important decreases the corresponding environmental hazards significantly. READ MORE

  6. 5. Wear resistance of heat-treated Advanced High Strength Steels and casting

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Joan Morata Royes; [2020]
    Keywords : ;

    Abstract : The necessity to improve the durability of the machinery used in the milling industry has lead to several types of research. One study is focused on the plates that are located in the stationary and moving jaws of crushers to diminish particles sizes of Gneiss and Diabase rocks. READ MORE