Essays about: "thesis for solid mechanics"
Showing result 1 - 5 of 49 essays containing the words thesis for solid mechanics.
-
1. Modelling the Water Table in a Bog
University essay from Lunds universitet/Fysiska institutionen; Lunds universitet/Institutionen för naturgeografi och ekosystemvetenskapAbstract : Over the past five years, an ongoing study at INES, Lund University, have examined the encroachment of trees and vegetation into a bog ecosystem in northern Scania, Sweden. While several factors have been identified as contributing to this ecological transformation, including, nutrient availability, and climate, the hydrological aspect remains a key area of investigation. READ MORE
-
2. Fatigue strength assessment of post weld improved welded joints
University essay from KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanikAbstract : In this thesis work a literature survey is done to collect published data for T-welded joints with a thickness of 5-12 mm, produced in high strength steel and treated with HFMI. In addition to this, large structures are researched. READ MORE
-
3. Technical requirements for mooring goods in the Swedish Navy
University essay from KTH/HållfasthetsläraAbstract : The objective of this thesis is to generate and enhance technical specifications for mooring equipment designated for the Swedish Navy, as commissioned by the Swedish Defence Materiel Administration. The technical specifications will primarily emphasize the capacity to endure various load scenarios imposed by the Swedish Defence on the mooring equipment. READ MORE
-
4. Experimental Testing of EPS-foam
University essay from KTH/HållfasthetsläraAbstract : The aim of this master thesis was to investigate the mechanical properties of ExpandedPolystyrene (EPS) through experimental testing. The strain was measured on thespecimen’s surface with Digital Image Correlation (DIC), in order to investigate howthe first principal strain at fracture initiation depends on the loading of the material. READ MORE
-
5. Modelling of a Glued Bolt Joint in Finite Element
University essay from KTH/HållfasthetsläraAbstract : This report presents a master thesis project at KTH at the school of Engineering Science. The project is done in collaboration with ABB Robotics, a company who develops industrial robots. A robot consists of several parts and the last structural part is the wrist. READ MORE