Multisensor Stress Monitoring For Non-Stationary Subjects

Abstract: Monitoring stress in real-time, in a non-laboratory environment can be benecial in several applications. One of these, which have been the motivation for this thesis, is to to perform this measurement during Attention decit hyperactivity disorder (ADHD) diagnosis. Monitoring several physiological responses to internal or external stimuli in a single soft-real-time system is nota solution widely used in an application like this. The thesis starts by studying several stress related responses in detail. Sensors for all of the responses are not implemented nor is it possible toimplement in to the desired system. After the study is was decided to implement two measurement modules. The first a Photo-plethysmogrophy (PPG) measurement module to measure heart rate and also estimate breathing. This module is prepared for estimating arterial blood oxygen levels but the calculation or verification have not been done. The second is Skin Conductance (SC) measurement module and in to both ofthese add a temperature sensor to measure the temperature of the skin. Time constraints limit the SC module to only be presented in theory. The PPG module on the other hand have been realisedin a prototype. This prototype performs the measurement in transmissive mode on the left earlobe, which leaves the hands free and it does not affect the hearing on that ear. The prototype giveout acceptable signal quality when good contact with the measurement site is achieved. The signalinterpretation, such as performing the signal analysis to count the beats per minute, is outside thescope of this thesis and will therefore not be presented but the signals can be seen in figures.