Road Feedback in a Steer-by-Wire System for a Passenger Car : enhancing the feeling of being connected

Abstract: Road feedback is an essential part of the driving experience, representing a connection betweenthe driver and the vehicle motion. Road feedback in a steer-by-wire system must berecreated and transferred to the driver through a feedback motor mounted on the steeringwheel. This project aimed to implement a function in the feedback motor control with thepurpose of giving the driver road feedback. The function should enhance the drivers trustand confidence in the steering system. Specifically, the function should provide the driverwith a feeling of being connected to the vehicle. A pre-study on the subject of steering feel was made as well as an interview study, whichresulted in a list of hypotheses. The hypotheses became a basis for generating conceptideas, together with measurement data of vehicle network signals for different drivingscenarios. Two different functions were then modelled and implemented in MathWorksSimulink. Function 1 models force components acting on the front road wheels in longitudinal,lateral and vertical direction. The forces result in a torque contribution fromeach dimension that acts around the steering axis and represents a reaction in the steeringsystem due to road disturbances. The torque is then translated to a steering wheel torque.Function 2 strives to capture road surface roughness through the high frequency informationin the steering rack motor torque. Three different road surfaces were studied; smoothasphalt, rough asphalt and gravel road. A test rig was used in order to verify the behaviour of the functions. The final step of theproject was to implement the functions in a test vehicle, where they could be further tunedand evaluated. The force component models of Function 1 captured different types of roadfeedback which were evaluated separately by timing, authenticity and desirability. Theresult of this evaluation was positive considering them separately. When the models werecombined it resulted in an unwanted behaviour. Function 2 gave torque feedback that feltauthentic and natural, especially for the gravel road case. However, it was more difficult todistinguish different asphalt types. The conclusion was that neither Function 1 nor 2 couldbe approved as finished functions, however both are considered as interesting concepts forfurther development. Fully steer-by-wire steering transmissions have now been approved for usage. This meansthat one of the remaining challenges for implementing steer-by-wire cars on today’s marketis the subjective views from the customers. Function 1 and 2 could be a way to providethe drivers with trust towards the steering, and at the same time, enhance the drivingexperience.