Essays about: "316L Rostfritt Stål"

Showing result 1 - 5 of 9 essays containing the words 316L Rostfritt Stål.

  1. 1. Influence of Post-treatments on Corrosion Properties of 3D printed Metal Components for Bioprocessing Applications

    University essay from KTH/Materialvetenskap

    Author : Leyla Koort; [2023]
    Keywords : PBF-LB 316L; surface post-treatments; as-built; tumbling; Hirtisation; DLyte; electropolishing; chemical milling; pitting corrosion; CPT; cyclic potentiodynamic polarisation curves; immersion test in 1M NaCl and 1M NaOH;

    Abstract : Additive manufacturing (AM) has the potential to overtake the conventional production of pipe systems of stainless steel grade 316L intended for bioprocessing applications by utilising powder bed fusion laser beam (PBF-LB) technologies. However, challenges such as high surface roughness need to be overcome and corrosion properties improved to meet industry standards. READ MORE

  3. 2. Effekter av livsmedelsförädling för lokalkorrosion på rostfritt stål 316L

    University essay from Lunds universitet/Industriell Produktion

    Author : Fredrik Waldur; [2022]
    Keywords : Technology and Engineering;

    Abstract : Pitting corrosion on 316L stainless steel has been widely studied, but knowledge is lacking within food processing environments. A new test setup was developed to enable electrochemical measurements inside a heat exchanger (pasteurizer) where solutions can be heated and cooled rapidly, allowing for corrosion tests of solutions that do not withstand high temperatures for a long period of time. READ MORE

  4. 3. Cooling Strategy Influence on Temperature in ETD Center

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Oskar Edinger; [2021]
    Keywords : Machining; Drilling; Exchangeable tip drill; 316L Stainless steel; Thermocouple; IR Thermography; Skärande bearbetning; Borrning; Löstoppsborr; 316L Rostfritt stål; Termoelement; IR Termografi;

    Abstract : Striving for increased productivity while maintaining hole quality and high process robustness when drilling requires knowledge about the working principles of heat generation, mechanics and a proper cutting fluid that aids in cooling, lubricating and evacuating chips from the cutting zone. If the heat generated in the tool-workpiece and tool-chip interfaces does not exit the cutting zone adequately through the chips, the workpiece material or the redistribution of coolant the hole quality can be impacted negatively and breakdowns may occur which reduces overall productivity. READ MORE

  5. 4. Influence of hydrogen on mechanical properties, microstructure and fracture surface of stainless steel 316L and stainless steel 304

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Mustafa Adnan Tawfeeq Salman; [2020]
    Keywords : Hydrogen embrittlement; stainless steel; microstructure; hydrogen charging; slow and fast strain rate.; Väteförsprödning; rostfritt stål; mikrostruktur; väte laddning; långsam och snabb töjnings hastighet;

    Abstract : Since hydrogen is an alternative energy source and has both economic and environmental benefits, it has received more attention. To use hydrogen a certain condition must be met, safe pressurized containers which are often made of metal. The metal isrequired due to the high mechanical strength and reasonable cost. READ MORE

  6. 5. Metal Filament 3D Printing of SS316L : Focusing on the printing process

    University essay from KTH/Maskinkonstruktion (Avd.)

    Author : Karthikesh Gante Lokesha Renukaradhya; [2019]
    Keywords : Additive manufacturing; stainless steel 316L; metal-polymer; sintering; Post processing; 3D printer; Additiv tillverkning; rostfritt stål 316L; metallpolymer; sintring;

    Abstract : As a cutting edge manufacturing methodology, 3D printing or additive manufacturing (AM) brings much more attention to the fabrication of complex structure, especially in the manufacturing of metal parts.A number of various metal AM techniques have been studied and commercialized. READ MORE