Essays about: "Abaqus Standard"

Showing result 1 - 5 of 28 essays containing the words Abaqus Standard.

  1. 1. FE-modelling of glulam connection in a pre-tensioned glulam truss : Detailed Finite element modelling of the connection between primary beam and compression stud in a sub-tensioned glulam roof truss

    University essay from KTH/Bro- och stålbyggnad

    Author : Edward Sebastian Swaretz; [2022]
    Keywords : Glulam; sub-tensioned roof truss; connection; instability; Abaqus Standard; Finite element method;

    Abstract : After the collapse of the roof structure in Tarfalahallen 2020, great attention has been focused on instability of sub-tensioned glulam roof trusses. Investigations were launched to find the reason for the collapse and the cause was instability in the roof truss that supported the roof. READ MORE

  3. 2. An investigation of the design of cylinderical steel tanks modelled according to EN14015 and according to the Eurocodes

    University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)

    Author : Yonas Gebre; [2022]
    Keywords : Keywords: Steel tank; Wind; Snow; FEM; Shell buckling; Non-linear analysis;

    Abstract : Abstract Storage tanks are above or below ground vessels for storing chemicals, petroleum and other liquid products. Above ground vertical cylindrical shells are typically thin walled structures prone to buckling and lose their stability especially when they are empty or have lower fluid level due to external loads. READ MORE

  4. 3. The Investigation and Modeling of the interaction between Paperboard Clippings in a Pipe Flow

    University essay from Lunds universitet/Institutionen för energivetenskaper

    Author : Lea Christierson; [2021]
    Keywords : Fluid-structure interaction; paperboard material modeling; transient pipe flow; overset mesh; image analysis; Technology and Engineering;

    Abstract : In the manufacturing process of Tetra Pak packages, holes are cut out of the paperboard for straws and caps. The left-over paperboard clippings, called confetti, need to be evacu- ated from the machine. However, this evacuation process has proven to cause problems due to jams arising as the confetti get stuck in joints and along the pipe walls. READ MORE

  5. 4. Infrared Curing of Glass Fiber Composite Tube : Optimization of the curing cycle

    University essay from Karlstads universitet/Avdelningen för maskin- och materialteknik

    Author : Rasmus Fredheim; [2021]
    Keywords : ;

    Abstract : This thesis has investigated the possibility of optimizing curing time by changing the energy source from a conventional oven to infrared radiation (IR) and if it is possible to achieve similar results as the company's current production of glass fiber composite tubes.   Many different parameters (time, temperature, heating rate, and rotation speed) might influence a cured composite tube's properties. READ MORE

  6. 5. Analysis of a Plate of High Strength Steel: Simulation of Impact and Determination of Residual Stresses

    University essay from KTH/Hållfasthetslära

    Author : Martin Hviid; [2021]
    Keywords : ;

    Abstract : In this study a finite element model has been created in ABAQUS/Standard in order to replicate impact tests performed by SSAB and to determine residual stresses in a plate. Uniaxial tensile tests have been done in order to determine the plastic behaviour of a high strength steel from the manufacturer SSAB and to determine whether the material can be assumed to be isotropic. READ MORE