Essays about: "Cantilever method"

Showing result 1 - 5 of 20 essays containing the words Cantilever method.

  1. 1. Isogeometric analysis as a tool for large deformation shape optimization

    University essay from Lunds universitet/Institutionen för byggvetenskaper; Lunds universitet/Hållfasthetslära

    Author : Max Kurki; [2021]
    Keywords : IGA; NURBS; Shape optimization; Large deformations; Topology optimization; Technology and Engineering;

    Abstract : The framework for isogeometric analysis (IGA) is presented, especially the construction and use of non-uniform rational B-splines (NURBS) to represent geometry, and a method utilizing IGA for structural optimization both for linear elastic and non-linear elastic deformations is implemented. Topology optimization of a linear elastic cantilever is performed, showing that IGA is inecient for topology optimization. READ MORE

  3. 2. Simulation of Mechanical Shock with Finite Element Analysis and Estimation of Shock Attenuation

    University essay from KTH/Hållfasthetslära

    Author : Cheng Qian; [2021]
    Keywords : shock; SRS; FEA; attenuation; chock; SRS; FEA; chockdämpning;

    Abstract : Space equipment is often subjected to mechanical shocks. Some devices like electronics are sensitive to shocks, and they can easily be damaged. To protect these devices, it is important to study shock penetrations in space structures. The Finite Element Method is an effective tool to simulate response to transient excitations. READ MORE

  4. 3. Comparative Study of Vision Camera-based Vibration Analysis with the Laser Vibrometer Method

    University essay from KTH/Industriell produktion

    Author : Pradeep Kumar Muralidharan; Hemanth Yanamadala; [2021]
    Keywords : OpenCV; Motion tracking; motion magnification; vision camera method; FFT; tracker; OpenCV; Rörelsesspårning; Rörelseförstoring; Synkamera -metod; FFT; Spårare;

    Abstract : Vibration analysis is a method that studies patterns in vibration data and measures vibration levels. It is usually performed on time waveforms of the vibration signal directly and on thefrequency spectrum derived by applying the Fourier Transform on the time waveform. READ MORE

  5. 4. Designing a New Warehouse to Improve Space Utilization and Handling Efficiency: A Case Study of a Production Warehouse

    University essay from Lunds universitet/Teknisk logistik

    Author : Erik Ramström; Emil Niklasson; [2021]
    Keywords : Warehousing; warehouse design; production warehouse; contextual factors; space utilization; Technology and Engineering;

    Abstract : Title: Designing a new warehouse to improve space utilization and handling efficiency: A case study of a production warehouse Authors: Emil Niklasson, Erik Ramström Supervisor: Joakim Kembro, Department of Industrial Management and Logistics, Faculty of Engineering, Lund University Problem description: The focus on warehousing has grown in the industry during the 21st century to increase the competitive advantage of companies. Despite this, the development of the coil warehouse at Alfa Laval has received little focus during the last decades. READ MORE

  6. 5. Virtual Material Testing of Adhesive Joints

    University essay from KTH/Hållfasthetslära

    Author : Vinit Jethalal Nagda; [2020]
    Keywords : ;

    Abstract : The automotive industry has shown an increasing interest in adhesive bonding for mixed-material joining. Modern design methods are critically dependent on accurate material models and data for numerical methods to enable the simulation of a design prototype early in the design process. READ MORE