Essays about: "Critical buckling stress"
Showing result 1 - 5 of 6 essays containing the words Critical buckling stress.
-
1. A comparative evaluation of hydrostatic pressure and buckling of a large cylindrical steel tank designed according to EN14015 and according to the Eurocodes
University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)Abstract : Above ground steel storage tanks are used worldwide for the storage of various liquids. EN 14015:2005, which has traditionally been used to design the tanks, does not necessarily fulfil the requirements of the Swedish Building Code. READ MORE
-
2. Strength analysis of load-bearingstructures according to Eurocode : Continuous kiln TC
University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Abstract : In this work, the load-bearing structure of a wood kiln is analyzed with the finite element method (FEM). The analysis is done with the program Inventor Nastran and consist of a linear stress and buckling analysis. The dimensions of the kiln can vary, therefore reference values are used where it is 32 m long, 12 m high and 10.5 m wide. READ MORE
-
3. Strength assessment of rig foundations for a sailing car carrier
University essay from KTH/LättkonstruktionerAbstract : The wPCC project (wind powered car carrier) is carried out by Wallenius Marine, KTH Royal Institute of Technology and SSPA Sweden. By developing a car carrier mainly propelled by the wind, the emissions are estimated to be reduced by up to 90 %. This thesis deals with the structural aspects of the design. READ MORE
-
4. Investigating In-plane Shear Behaviour of Uncured Unidirectional Prepreg Tapes
University essay from KTH/LättkonstruktionerAbstract : Steering of prepreg tows in an automated fibre placement (AFP) process allows geodesic layup trajectory over a doubly-curved surface, as well as the potential to improve the efficiency of composite structures by tailoring their stiffness. However, defects (such as out-of-plane buckling and tow pull off) are commonly generated when the steering radius exceeds a critical limit, which impact the mechanical properties of the finished product. READ MORE
-
5. The Study of Buckling Behavior of Al-foil With Central Crack
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : The present paper studied the buckling phenomena of membranes under tensile load with and without central crack. The studies of fracture mechanics are tested within certain conditions of membranes. The tensile test has been performed with Al-foil in different crack lengths, i.e. READ MORE