Essays about: "Cutting tool inserts"

Showing result 1 - 5 of 22 essays containing the words Cutting tool inserts.

1. 1. Machinability study on GCI brake discs - Effects of material variations and process behavior on tool life

   University essay from Lunds universitet/Industriell Produktion

   Author : Christian Jaunviksna; [2023]
   Keywords : Metal cutting Machinability Grey cast iron Tool wear Cutting data Hardness Microstructure Segmentation; Technology and Engineering;

   Abstract : Grey cast iron is one of the most used materials in the automotive industry. The material has a range of properties that makes it suitable for machining applications, but manufacturers still experience machinability problems. READ MORE

3. 2. Investigations of Tool Wear Mechanisms in the Turning of Conventional, Calcium Treated and Ultraclean Steels

   University essay from KTH/Materialvetenskap

   Author : Milou Göransson; [2023]
   Keywords : Clean steel; Ultraclean steel; Longitudinal turning; Cemented carbide cutting tool; Chemical vapor deposition coating; Machinability; Tool wear; Non-metallic inclusions; Rent stål; Ultrarent stål; Längdsvarvning; Hårdmetall skärverktyg; Kemisk ångdeponering beläggning; Bearbetningsbarhet; Verktygsslitage; Icke-metalliska inneslutningar.;

   Abstract : Application of clean and ultraclean steels have shown to provide favourable mechanical properties for bearings and transmission components, specifically regarding fatigue performance, compared to conventional steel grades. Clean steels are characterized by containing a very low level of non-metallic inclusions. READ MORE

4. 3. Study of Porosity in Uncoated Cemented Carbide Tools During Titanium Alloy Machining.

   University essay from Lunds universitet/Industriell Produktion

   Author : Cornelis Botermans; [2023]
   Keywords : Technology and Engineering;

   Abstract : During high speed machining of titanium alloys both the tool and workpiece material diffuse into one another affecting the surface integrity of the cutting tool edge and leading to fracture. One proposed mechanism by which the tool integrity is compromised results from the possible formation of porosity in to subsurface of the tool substrate close to the tool cutting edge. READ MORE

5. 4. Tribological behaviour of CVD diamondcoated tools during machining of highstrength aluminum alloy : Master thesis project on tribological behavior of super hard materials: chemicalvapor deposition diamond (CVD) coated cutting tools and polycrystalline diamond(PCD) cutting tools used in machining of high strength aluminium alloy

   University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

   Author : Oskar Lundquist; [2022]
   Keywords : CVD diamond coating; CVD; Aluminum machining; Tool coatings; PCD; diamond coating; diamond; Tribology; Material Science.;

   Abstract : Machining of Aluminum can be complicated due to large amounts of adhesion and diffusion of the aluminum onto the cutting tool, causing effects such as built-up layers and built-up edges. This leads to poor surface finishes and can significantly affect the tool life. READ MORE

6. 5. Metamodelling of a Finite Element Analysis of a Drilling Process with Replaceable Inserts

   University essay from Högskolan i Skövde/Institutionen för ingenjörsvetenskap

   Author : Samy Akrouh Ettaghadouini; [2019]
   Keywords : drilling; speed; feed; CAD; FEM; simulations; metamodel; neural network; optimization;

   Abstract : The aim of this project is to create a metamodel from a drilling tool with replaceable inserts from FEA of the machining process using MATLAB and ABAQUS. This report contains research in drilling and in metamodeling using neural networks and the work from the design of the CAD, through FEA and simulations, to the metamodeling, excluding the optimization. READ MORE