Essays about: "Drill Parameters"

Showing result 6 - 10 of 17 essays containing the words Drill Parameters.

  1. 6. Rock Strength Testing of Drill Core Samples From Kiirunavaara Below Level 1365

    University essay from Uppsala universitet/Institutionen för geovetenskaper

    Author : Giorgios Doulamis; [2022]
    Keywords : Kiirunavaara; Point Load test; Leeb hardness test; intact rock strength; correlation factor;

    Abstract : The geotechnical parameters of the different lithologies are of great importance regarding mining, infrastructures development and safety. The main aims of this thesis project are the evaluation of the previously acquired point load tests (PLT) data and the acquisition of a larger set for the various lithologies and alterations. READ MORE

  3. 7. Identifying Important Features to Minimize Hole Deviation in Percussive Drilling

    University essay from KTH/Maskinkonstruktion (Inst.)

    Author : Ketan Dhananjay Deshpande; [2021]
    Keywords : Bending; Buckled profile; Drilling; Hole deviation; Mathematical model; Böjning; Buckled profil; Borrning; Hålavvikelse; Matematisk modell;

    Abstract : Hole deviation is one of the most significant problems in drilling applications. Deviated holes result in inefficient blasting and have severe economic impacts due to increased equipment consumption. Conversely, straighter holes help in increasing production scales and reduce operational costs. READ MORE

  4. 8. A Geometallurgical Approach Towards the Correlation Between Rock Type Mineralogy and Grindability: A case study in Aitik mine, Sweden

    University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Author : Raoul Schmitt; [2021]
    Keywords : Geometallurgy; autogenous grinding; process mineralogy; grindability test; abrasion breakage; automated mineralogy;

    Abstract : Aitik is a large copper porphyry type deposit located in northern Sweden, currently exploited at an annual rate of approximately 45Mt. The ore's exceptionally low head grade of 0.22 % Cu and varying degrees of hardness across the entire deposit pose challenges to the two fully autogenous grinding lines, each of which comprises a 22. READ MORE

  5. 9. Research and Testing of an Electromechanical solution for Vibration Assisted Drilling of Aerospace Materials

    University essay from Uppsala universitet/Solcellsteknik

    Author : Jonathan Nordenholm; [2020]
    Keywords : vibration; drilling; chips; aerospace; advanced drilling unit;

    Abstract : This thesis considers vibration drilling in aerospace materials. The tolerances of the drilled holes in aerospace industry are very low since hole quality is an important factor. Conventional methods of drilling create long ribbon formed chips that increases the heat formation and decreases the hole quality. READ MORE

  6. 10. Evaluation of a Programmable Hydraulic Valve for Drill Rig Applications

    University essay from Linköpings universitet/Fluida och mekatroniska system

    Author : Jonathan de Brun Mangs; Mikael Tillquist; [2018]
    Keywords : Hydraulic valve; CAN; Drill rig; Rock drill; Blast hole drilling; Time delays; Ziegler-Nichols; PI-control;

    Abstract : The increase of intelligent systems can be seen in every industry. Integrated sensors and processors are used with internal control systems to create better performance for mobile hydraulic applications. The report describes how an evaluation was made to see if the productivity of a drill rig could be increased. READ MORE