Essays about: "Elasticitetsmodulen"

Showing result 1 - 5 of 13 essays containing the word Elasticitetsmodulen.

  1. 1. Technical requirements for mooring goods in the Swedish Navy

    University essay from KTH/Hållfasthetslära

    Author : Dennis Ekman; [2023]
    Keywords : Mechanics; Solid Mechanics; Navy; FMV; Defence; Ship; Boat; Hawser; Mooring; Mooring goods; FEM; Mekanik; Hållfasthetslära; Marinen; Marin; Flottan; FMV; Försvaret; Skepp; Båt; Tågvirke; Förtöjningsgods; Tamp;

    Abstract : The objective of this thesis is to generate and enhance technical specifications for mooring equipment designated for the Swedish Navy, as commissioned by the Swedish Defence Materiel Administration. The technical specifications will primarily emphasize the capacity to endure various load scenarios imposed by the Swedish Defence on the mooring equipment. READ MORE

  3. 2. Size effect in wood : Characterization of mechanical properties using digital image correlation method

    University essay from Uppsala universitet/Tillämpad mekanik

    Author : Amir Saeidi; Olafur Johannsson; [2023]
    Keywords : compression test longitudinal direction; digital image corre- lation DIC ; ncorr; phyton; pinewood; size effect; stiffness matrix; wood- construction; YAWCAM; young’s modulus; digital image correlation DIC ; elasticitetsmodul; furu; kom- pressionstest längs fiberriktning; ncorr; phyton; storlekseffekt; styvhetsma- tris; trä-konstruktion; YAWCAM;

    Abstract : As a natural composite material, wood exhibits complex structural char-acteristics and diverse behavior under compression and tensile forces. Itsanisotropic nature results in mechanical properties that vary depending onthe load direction along its longitudinal, tangential, and radial grains. READ MORE

  4. 3. Magnetic Resonance Elastography in Muscle Tissue based on Anisotropic Assumption

    University essay from KTH/Skolan för kemi, bioteknologi och hälsa (CBH)

    Author : Frederick Holmer Fann; [2022]
    Keywords : Magnetic Resonance Elastography MRE ; Muscle Tissue; Anisotropic MRE reconstruction;

    Abstract : Mechanical properties of muscle tissue are linked to its function. Magnetic Resonance Elastography (MRE) has the capability toquantitively measure these mechanical properties of soft tissue in-vivo. However, most MRE methods assume tissue isotropy during MRE reconstruction which is not an appropriate assumption for muscle tissue. READ MORE

  5. 4. CHARACTERISATION OF CROSS LAMINATED TIMBER PROPERTIES

    University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaper

    Author : Emil Nilsson; [2021]
    Keywords : CLT; cross laminated timber; in-plane loading; out-of-plane loading; beam; rolling shear modulus; experimental tests; FE-modelling; Technology and Engineering;

    Abstract : This project concerns an analysis of a hitherto untested method for determining the modulus of elasticity (MoE) and shear modulus parallel to grain, as well as the rolling shear modulus of cross laminated timber (CLT) through 3-point bending tests. A review of analytical models and methods is included, followed by an evaluation of the effect of the annual ring orientation and shear stress distribution at shear loading of individual board cross-sections. READ MORE

  6. 5. Polymer Directed Engineering of Novel Cellulose Network

    University essay from KTH/Fiber- och polymerteknologi

    Author : Christel Gradin; Adina Landström; Julia Szecsödy; [2021]
    Keywords : Hydrogel; Carboxylated CNF; TEMPO-oxidation; bis-MPA ammonium dendrimer; Polymer salt bridge; Rheology;

    Abstract : This study investigated a CNF/dendrimer hydrogel and how different concentrations of the carboxylated CNF and bis-MPA ammonium dendrimer affected the hydrogels’ rheological properties. A third generation bis-MPA ammonium dendrimer was diffused into a dispersion of carboxylated cellulose nanofibrils. READ MORE