Essays about: "End Notched Flexure"

Showing result 1 - 5 of 6 essays containing the words End Notched Flexure.

  1. 1. Virtual Material Testing of Adhesive Joints

    University essay from KTH/Hållfasthetslära

    Author : Vinit Jethalal Nagda; [2020]
    Keywords : ;

    Abstract : The automotive industry has shown an increasing interest in adhesive bonding for mixed-material joining. Modern design methods are critically dependent on accurate material models and data for numerical methods to enable the simulation of a design prototype early in the design process. READ MORE

  3. 2. Characterization of thin laminate interface by using Double Cantilever Beam and End Notched Flexure tests

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Moiz Majeed; Rahitya Venkata Teja Geesala; [2020]
    Keywords : Double Cantilever Beam DCB ; End-Notched Flexure ENF ; Fracture toughness; Low density Polyethylene LDPE ; Three-point bending test;

    Abstract : This thesis is intended to identify the mode I and mode II fracture toughness to characterize the thin laminate interface by using the Double Cantilever Beam test (DCB) and End Notched Flexure test (ENF). This study’s thin laminate was Polyethylene Terephthalate and Low-Density Polyethylene (PET-LDPE), which is mostly used by packaging industries in the manufacturing of packages to store liquid food. READ MORE

  4. 3. Spot welded ENF-Specimen

    University essay from Högskolan i Skövde/Institutionen för ingenjörsvetenskap

    Author : Antonio Rafael García Gil; Oualid El Mernissi; [2014]
    Keywords : spot; welded; reinforced; ENF; specimen; adhesive; ABB; Robotics; steel; sheets;

    Abstract : The behaviour of spot welded joints is to be studied in shear mode by using the end notched flexure (ENF) specimen. The specimen counts on several spot welds spaced with the same gap along the entire length except for the notch. READ MORE

  5. 4. Stability of End Notched Flexure Specimen

    University essay from Institutionen för teknik och samhälle

    Author : Arun Gojuri; [2010]
    Keywords : Energy release rate; Finite element method; ENF-specimen; Delamination; Composite material; isotropic orthotropic; controlled displacement;

    Abstract : This paper deals with two-dimensional Finite Element Analysis of the End Notched Flexure (ENF) specimen. The specimen is known to be unstable if the crack length is shorter than some critical crack length acr. READ MORE

  6. 5. System for measurement of cohesive laws

    University essay from Institutionen för teknik och samhälle

    Author : Tomas Walander; [2009]
    Keywords : End Notched Flexure; J-integral; Cohesive law; Finite element method; Energy release rate;

    Abstract : In this thesis an experimental method to calculate cohesive characteristics for an adhesive layer in a End Notched Flexure (ENF) specimen is presented and evaluated. The method is based on the path independent J-integral where the energy release rate (ERR) for the adhesive is derived as a function of the applied forces and the rotational displacements at the loading point and at the supports of the specimen. READ MORE