Essays about: "Eurocode 3"
Showing result 1 - 5 of 25 essays containing the words Eurocode 3.
-
1. Interaction for flexural column buckling : Analytical procedures compared with FE-simulations
University essay from KTH/Bro- och stålbyggnadAbstract : This master's thesis presents a study on the stability of steel structures under flexural bucklingconstraints. The study focuses on the interaction and behaviour of flexural buckling formulas in SSEN-1993-1-1 and Swedish BSK and the performance of actual structural members subjected to suchconstraints. READ MORE
-
2. A comparative evaluation of hydrostatic pressure and buckling of a large cylindrical steel tank designed according to EN14015 and according to the Eurocodes
University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)Abstract : Above ground steel storage tanks are used worldwide for the storage of various liquids. EN 14015:2005, which has traditionally been used to design the tanks, does not necessarily fulfil the requirements of the Swedish Building Code. READ MORE
-
3. Buckling of Short End-Bearing Piles in Clay
University essay from KTH/Jord- och bergmekanikAbstract : Structural design of piles with respect to buckling in Sweden is commonlymade in accordance with the calculation model from the Commission ofPile Research, PKR. A prerequisite for this model is that the elasticbuckling length of the pile is shorter than the physical length. READ MORE
-
4. The use of higher steel grades in building elements
University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserAbstract : Structural steel is one of the main building materials used commercial. Its strength is its formality and high yield strength which allows less material overall. Steel is often divided into steel grades such as S275, S355, S420 and so forth. READ MORE
-
5. Performance of joints for glued laminated timber exposed to the ISO fire temperature curve
University essay from Lunds universitet/Avdelningen för BrandteknikAbstract : As society becomes more ecologically conscious there is a push toward the use of materials with a smaller environmental burden, one of these materials is glulam (GLT), which has gained a lot of traction in recent years not only for ecological reasons but for its ease in manufacture, transport, noise dampening, etc. The focus of this project was to evaluate the influence of different joint configurations on the fire performance of glulam members. READ MORE