Essays about: "FE-Modell"
Showing result 1 - 5 of 25 essays containing the word FE-Modell.
-
1. Evaluation of Crack Depth Meter - An investigation of the crack depth meters possibilities and limitations for commonly occurring damage mechanisms
University essay from KTH/HållfasthetsläraAbstract : In this master thesis, the accuracy of the crack depth meter RMG 4015 was evaluated for different types of cracks with various damage mechanisms. In total, 61 crack depth measurements were conducted with the crack depth meter on 56 cracks which were located in the 23 different test pieces supplied by Kiwa. READ MORE
-
2. Evaluation of Coefficient of Friction in Oblique Helmet Impacts: An Experimental and Numerical Study
University essay from KTH/HållfasthetsläraAbstract : The focus of this thesis was to increase the knowledge in the area of "dynamic friction" during oblique helmet impacts, both experimentally and numerically. Physical experiments have been performed with multiple helmets, different angles of the anvil and different surface materials, with results of impact forces from the anvil and accelerations of the head. READ MORE
-
3. Linear Impact of Bicycle Helmet – Experimental Testing and FE-modelling
University essay from KTH/HållfasthetsläraAbstract : The aim with this master thesis was to set up a FE-simulation of an impact test of a bike helmet in LS-DYNA that correlates well with the peak acceleration score of a real life impact test. Furthermore, a parametric study has been performed in LS DYNA to investigate the robustness of the model, as well as to see which parameters have a great influence on the peak acceleration score. READ MORE
-
4. Operational modal analysis and finite element modeling of a low-rise timber building
University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)Abstract : Timber is a building material that is becoming more common and of interest for use in high-rise buildings. One of the reasons is that timber requires less energy input for the manufacturing process of the material compared to non-wood based materials. READ MORE
-
5. FE-model for prediction of welding distortions in components made of preformed stainless steel sheets
University essay from KTH/HållfasthetsläraAbstract : This master thesis was carried out at Scania CV AB. The focus for this thesis is the prediction of welding distortions that can cause problems in the manufacturing process of Scania's after-treatment system. The after-treatment system is mainly assembled by sheet metal plates of the ferritic stainless steel EN 1.4509. READ MORE