Essays about: "FE-model"
Showing result 1 - 5 of 142 essays containing the word FE-model.
-
1. Evaluation of Crack Depth Meter - An investigation of the crack depth meters possibilities and limitations for commonly occurring damage mechanisms
University essay from KTH/HållfasthetsläraAbstract : In this master thesis, the accuracy of the crack depth meter RMG 4015 was evaluated for different types of cracks with various damage mechanisms. In total, 61 crack depth measurements were conducted with the crack depth meter on 56 cracks which were located in the 23 different test pieces supplied by Kiwa. READ MORE
-
2. Validation of Finite Element Model of a Tetra Pak Package
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : There is a high dependency on accurate finite element models in the packaging industry for concept selection, design and virtual validation of packages. One of themost used materials for these packages is High-Density Polyethylene (HDPE). Thismaterial is highly anisotropic, strain rate dependent and has different behavior intension and compression. READ MORE
-
3. Vibrations in a high frequency clt floor panel - Measurement, prediction and evaluation
University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaperAbstract : There is an increased need for floors that can accommodate different type of sensitive equipment [1]. Further, it is recommended to design these floors as high frequency floors (HFF) to be able to meet the stringent vibration criteria [1]. READ MORE
-
4. The influence of soil modeling on the prediction of vehicle dynamics and mobility – A comparison between the Finite Element Method and a Semi[1]Empirical Model
University essay from Uppsala universitet/Institutionen för informationsteknologiAbstract : This master's thesis investigated the influence of soil modeling on vehicle dynamics and mobility predictions with a focus on two different soil models implemented in Project Chrono: the Bekker-Wong model, and a Finite Element (FE) model. The primary objective is to provide insights for decision-making regarding the most suitable soil model under specific circumstances. READ MORE
-
5. FE-modelling of glulam connection in a pre-tensioned glulam truss : Detailed Finite element modelling of the connection between primary beam and compression stud in a sub-tensioned glulam roof truss
University essay from KTH/Bro- och stålbyggnadAbstract : After the collapse of the roof structure in Tarfalahallen 2020, great attention has been focused on instability of sub-tensioned glulam roof trusses. Investigations were launched to find the reason for the collapse and the cause was instability in the roof truss that supported the roof. READ MORE