Essays about: "Finite element simulation of tensile test"
Showing result 6 - 10 of 18 essays containing the words Finite element simulation of tensile test.
-
6. Simulation of ultrasonic time of flight in bolted joints
University essay from KTH/HållfasthetsläraAbstract : Ultrasonic measurements of the preload in bolted joints is a very accurate method since it does not depend on the friction and other factors which cause difficulties for common methods. The ultrasonic method works by emitting an ultrasonic pulse into the bolt which is reflected at the end and returned to the transducer, the change in the time of flight (TOF) can be related to the elongation of the bolt and therefore the preload. READ MORE
-
7. Characterization of thin laminate interface by using Double Cantilever Beam and End Notched Flexure tests
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : This thesis is intended to identify the mode I and mode II fracture toughness to characterize the thin laminate interface by using the Double Cantilever Beam test (DCB) and End Notched Flexure test (ENF). This study’s thin laminate was Polyethylene Terephthalate and Low-Density Polyethylene (PET-LDPE), which is mostly used by packaging industries in the manufacturing of packages to store liquid food. READ MORE
-
8. Material parameter identification of a thermoplastic using full-field calibration
University essay from Linköpings universitet/Mekanik och hållfasthetsläraAbstract : Finite element simulation of thermoplastic components is gaining importance as the companies aim to avoid overdesign of the components. Cost of the component can be minimized by using an adequate amount of material for its application. READ MORE
-
9. Experimental Testing and MaterialModeling of Anisotropy in InjectionMoulded Polymer Materials
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : Experimental characterization of the mechanical properties in a thin injection moulded Low-Density Polyethylene (LDPE) plate is per- formed in this work. Anisotropy in LDPE at different material orientations is measured from the Digital Image Correlation (DIC) observation of the specimens during uniaxial tensile test. READ MORE
-
10. Investigating In-plane Shear Behaviour of Uncured Unidirectional Prepreg Tapes
University essay from KTH/LättkonstruktionerAbstract : Steering of prepreg tows in an automated fibre placement (AFP) process allows geodesic layup trajectory over a doubly-curved surface, as well as the potential to improve the efficiency of composite structures by tailoring their stiffness. However, defects (such as out-of-plane buckling and tow pull off) are commonly generated when the steering radius exceeds a critical limit, which impact the mechanical properties of the finished product. READ MORE