Essays about: "Fuel mixing"
Showing result 1 - 5 of 32 essays containing the words Fuel mixing.
-
1. Simulation of Combustion in a Hybrid Rocket Engine
University essay from KTH/Skolan för teknikvetenskap (SCI)Abstract : A numerical investigation on the combustion mechanics of a hybrid rocket engine is performed through unsteady Reynolds-averaged Navier-Stokes simulation. The hybrid rocket engine model is based on an experimental laboratory scale engine design operating on GOX and HDPE as a propellant. READ MORE
-
2. 3D CFD Simulations of Hydrogen Engine Combustion
University essay from Lunds universitet/Institutionen för energivetenskaperAbstract : With the trend of decarbonization, the transport sector is exploring possibilities of fossil fuel free solutions. Hydrogen can be a potential fuel for future engine applications. In this work, the concept of H2 HPDI is investigated, where a pilot diesel injection ignites the hydrogen jet. READ MORE
-
3. Design of a modular small-scale PMMA/Air hybrid rocket research engine
University essay from Luleå tekniska universitet/Institutionen för system- och rymdteknikAbstract : Rocket propulsion using the hybrid-propellant scheme is a technology that offers much promise in applications where high-performance liquid rocket engines are deemed too complex and solid rocket motors are considered to lack performance or safety. However, despite extensive research, there is still a lack of knowledge in the theoretical aspects of hybrid rocketry, especially in the area of fuel-oxidizer mixing and fuel regression rate. READ MORE
-
4. Continuous Hydrothermal Co-liquefaction of Biomass : An experimental study on the effects of fuel mixing on the composition and yield of biocrude and hydrochar
University essay from Umeå universitet/Institutionen för tillämpad fysik och elektronikAbstract : An experimental study on the effect of fuel mixing on the products resulting from hydrothermal liquefaction (HTL) was conducted. The feedstocks used were kraft lignin (KL), GROT (GT) and microalgae cultivated in wastewater (MA). Three sets of mixtures were prepared, each containing two types of feedstocks with a 1:1 ratio: KLGT, MAKL, and MAGT. READ MORE
-
5. Geometrical Improvement of Fuel Nozzle Locations in the SGT-750 Gas Turbine : An investigation into fuel-air mixing in main channels 1 & 2
University essay from Linköpings universitet/Mekanisk värmeteori och strömningsläraAbstract : This study was conducted on SGT-750, which utilizes can type fourth generation DLE burner, developed at Siemens Energy AB, in Finspång, Sweden. The aim of this study is to obtain a flat fuel profile at the outlet of main channel 1 and main channel 2, demonstrating a proper mixing of fuel and air in the main channels leading to reducing local high-temperature points, and thus, reducing thermal NOx emissions. READ MORE