Essays about: "Green additive manufacturing"

Showing result 1 - 5 of 8 essays containing the words Green additive manufacturing.

  1. 1. Conjugate Heat Transfer Analysis of HPGP Thruster

    University essay from Luleå tekniska universitet/Rymdteknik

    Author : Lisa Svensson; [2024]
    Keywords : aerospace; HPGP; ECAPS; ANSYS; conjugate heat transfer; thruster; space;

    Abstract : This master's thesis was conducted in collaboration with ECAPS, where a conjugate heat transfer analysis on their High Performance Green Propulsion (HPGP) 22N thruster was done. ECAPS is a Swedish propulsion company specializing in green propulsion. They develop thrusters for spacecraft orbit and attitude control, utilizing the propellant LMP-103S. READ MORE

  3. 2. Automatization of de-powdering process for binder jetting technology

    University essay from Uppsala universitet/Institutionen för materialvetenskap

    Author : Mikael Borg; [2022]
    Keywords : additive manufacturing; binder jetting; computational fluid dynamics; computer aided design; de-powdering;

    Abstract : Additive manufacturing has gained considerable attention in recent years due to its capabilities of producing complex parts with tailormade mechanical properties. Because of its infancy state, additive manufacturing production chains are seldom optimized to the same extent as conventional manufacturing techniques. READ MORE

  4. 3. Process development and optimization towards binder jetting of Vanadis 4 Extra

    University essay from Uppsala universitet/Institutionen för materialvetenskap

    Author : Jivesh Jain; [2022]
    Keywords : Binder jetting; tool steel; Vanadis 4 Extra; sintering; debinding; wear resistance;

    Abstract : Additive manufacturing (AM) has experienced significant growth and development in recent years, owing to the ability to produce complex parts using a wide range of materials with relative ease. Powder bed-based metal AM has been at the forefront of this growth, even reaching the point where parts can be manufactured for end-use applications. READ MORE

  5. 4. Developing Robot assisted Plastic 3D Printing Platform

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : FAHAD AHMAD KHAN; [2021]
    Keywords : Additive manufacturing; Fused Deposition Modeling; Robot assisted 3D printing; Green additive manufacturing; FDM with robot;

    Abstract : This project was initiated by Dr. Sasan Dadbaksh upon listening to the requirements I presented for my master thesis. READ MORE

  6. 5. Process Optimization and Characterization of Inconel 718 Manufactured by Metal Binder Jetting

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Tobias Eriksson; [2021]
    Keywords : Inconel718; Additive Manufacturing; Binder Jetting; Powder Metallurgi; Superalloy;

    Abstract : The development of a process chain for Inconel 718 production utilizing Binder Jetting has been investigated. Different powder sources were compared by the effect they had on machine compatibility, powder bed packing, recyclability, green density, sintering parameters, final density, porosity, and mechanical properties. READ MORE