Essays about: "High pressure turbine"
Showing result 6 - 10 of 61 essays containing the words High pressure turbine.
-
6. Experimental pressure loss analysis in a mini tube for a fully developed turbulent airflow. : Mini channels of lengths 22.5 mm to 150 mm in length with a constant diameter of 1.5 mm
University essay from Linköpings universitet/Mekanisk värmeteori och strömningsläraAbstract : The cooling systems in a gas turbine are especially important as the turbine blades and vanes are exposed to extreme temperatures. The relatively cool air is extracted from the compressors and fed to the turbines to cool the turbine blades. READ MORE
-
7. LES modelling of spray combustion
University essay from Lunds universitet/Institutionen för energivetenskaperAbstract : Computational fluid dynamics is a powerful method for understanding the flow and combustion that occurs inside aircraft engines and will be a key tool in the transition from conventional fossil-based fuel to sustainable alternatives. Because conventional fuels have been more widely researched, an attempt at simulating the combustion of alternative fuels should be preceded by the development of a method that is capable of accurately simulating the combustion of a conventional fuel. READ MORE
-
8. Internal Combustion Engine Calibration considering the Embedded Systems Sensor Accuracy
University essay from KTH/Skolan för industriell teknik och management (ITM)Abstract : In recent years, the increasing economic, environmental and legal demands on internal combustion engines to reduce emissions and fuel consumption are a major challenge. A lot of effort has been put into achieve reliable methods of diagnosis, fault detection and monitoring to increase safety and efficiency in vehicles. READ MORE
-
9. Performance Investigation & Gas Exchange Assessment of Exhaust Piston–assisted Turbocharged Engine (EPTE) Concept : A simulation-based assessment
University essay from KTH/Skolan för industriell teknik och management (ITM)Abstract : There is an increasing stringency in the emission legislation within the transport industry along with ambitious performance demands from the customer side. These have pushed the vehicle manufacturers and relevant component suppliers to develop and integrate a wide portfolio of engine technologies. READ MORE
-
10. External Heat Transfer Coefficient Predictions on a Transonic Turbine Nozzle Guide Vane Using Computational Fluid Dynamics
University essay from Linköpings universitet/Mekanisk värmeteori och strömningsläraAbstract : The high turbine inlet temperature of modern gas turbines poses a challenge to the material used in the turbine blading of the primary stages. Mechanical failure mechanisms are more pronounced at these high temperatures, setting the lifetime of the blade. READ MORE
