Essays about: "Lamellas"

Showing result 1 - 5 of 12 essays containing the word Lamellas.

1. 1. Experimental studies of radiation damage in uranium nitride

   University essay from KTH/Fysik

   Author : Maria Giamouridou; [2023]
   Keywords : uranium nitride nuclear fuel; advanced nuclear fuel; uranium nitride fabrication; uranium nitride characterisation; Spark Plasma Sintering; proton irradiation; irradiation damage; TANDEM accelerator; irradiation induced cracking; irradiation induced hardening; irradiation induced swelling; hydrogen implantation; dislocation loops; kärnbränsle av urannitrid; avancerat kärnbränsle; tillverkning av urannitrid; karakterisering av urannitrid; Spark Plasma Sintering; protonbestrålning; strålningsskador; TANDEM-accelerator; strålningsinducerad sprickbildning; strålningsinducerad härdning; strålningsinducerad svällning; väteimplantation; dislokationsloopar;

   Abstract : The effect of proton (H+) irradiation on uranium mononitride (UN) and UN compositefuel with 10 at.% ZrN (UN10at%ZrN) was examined. Protons of 2 MeV with fluences of1E17, 1E18, 1E19 and 1E20 ions/cm2 were accelerated towards the fabricated samples in orderto investigate the evolution of the micro-structure. READ MORE

3. 2. Modelling and testing of CLT panels for evaluation of stiffness

   University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)

   Author : Sebastian Svensson Meulmann; Egzon Latifi; [2021]
   Keywords : Cross-laminated timber CLT ; Four-point bending; Bending stiffness; Shear stiffness; Plates; Lamellas;

   Abstract : The use of timber in building structures is steadily increasing. cross laminated timber (CLT) is an engineered wood product made of an uneven number of layers of lamellas glued at an angle of 90 degrees to each other. READ MORE

4. 3. Dynamic Torque Modeling of a Wet Lamella Clutch Pack

   University essay from Lunds universitet/Industriell elektroteknik och automation

   Author : Jacob Wallersköld; Johan Appelros; [2021]
   Keywords : wet lamella clutch; friction modeling; torque modeling; torque accuracy; force measurements; system identification; grey-box modeling; Technology and Engineering;

   Abstract : Wet lamella clutches are used in the automotive industry to enable all-wheel drive and thereby increase acceleration, handling and safety of cars. The clutches work by transmitting torque from an incoming- to an outgoing shaft through a series of lamella - steel-disc friction surfaces (lamella pack), lubricated by an oil. READ MORE

5. 4. Industrial Requirements for Cross-Laminated Timber Manufacturing

   University essay from Linnéuniversitetet/Institutionen för skog och träteknik (SOT)

   Author : Matilda Torneport; [2021]
   Keywords : Cross-laminated timber; CLT industry; Wood species; Adhesive; Strength class; Timber grades;

   Abstract : Wood is a valuable sustainable material that meets the requirements for structural application. Cross-laminated timber (CLT) is a wood-based product that is mainly used in the building industry. Due to the rapid global market increase, a number of new CLT plants are emerging worldwide and thereby a need for standardisation is more than ever. READ MORE

6. 5. Hydraulics of lamella sedimentation.A study of the lamella settlers at Ringsjö water treatment plant, Sweden.

   University essay from Lunds universitet/Avdelningen för Teknisk vattenresurslära

   Author : Maria Lytra; [2019]
   Keywords : Lamella settling tanks; Inclined sedimentation; Ringsjö water treatment plant; Suspended solids separation; Technology and Engineering;

   Abstract : This study investigates the lamella settlers in Ringsjö water treatment plant, Sweden, in terms of water movement and performance. The treatment plant has two blocks with differences in the flocculation and lamella settlers, where block 1 is not able to process the maximum designed flow rate without the addition of polymers. READ MORE