Essays about: "Milling"

Showing result 1 - 5 of 111 essays containing the word Milling.

  1. 1. Variations in material properties of grey cast iron and its impact on tool wear

    University essay from Lunds universitet/Industriell Produktion

    Author : Andreas Söderholm; [2021]
    Keywords : Grey cast iron; hard inclusions; tool wear; machinability; graphite structure.; Technology and Engineering;

    Abstract : Among cast materials, grey cast iron and ductile iron makes up about three quarters of all cast parts. This makes the manufacturing and machining of grey cast iron an important economical factor for the automotive industry. READ MORE

  2. 2. Baking volume of wheat flour : assessment of novel analyses and parameters in prediction

    University essay from SLU/Department of Molecular Sciences

    Author : Assar Sundholm; [2021]
    Keywords : baking volume; wheat flour; Alveolab; SDmatic; SRC 2;

    Abstract : In the milling industry baking volume is used as the gold standard for wheat flour quality. Determination of baking volume is a time-consuming and blunt method, demanding a quicker and more precise substitute. The aim of this thesis was to assess how different rheological and chemical parameters affect baking volume. READ MORE

  3. 3. Dispersion of cement-based grout with ultrasound and conventional laboratory dissolvers

    University essay from KTH/Byggvetenskap

    Author : Antranik Karamanoukian; [2020]
    Keywords : ultrafine cement grout; microfine cement grout; dispersion; additives; ultrasound dissolver; laboratory dissolver; ultrafint cementbruk; mikrofin cementbruk; dispergering; tillsatser; ultraljud apparat; laboratorieblandaren;

    Abstract : In any underground facilities especially tunnels, it is essential to seal the area against water ingress and leakage of reserved materials. Grouting is a common method used to seal rocks around tunnels, successful grouting reduces the duration and cost of the construction, guarantees better working environment and higher safety, minimizes the maintenance and most important decreases the corresponding environmental hazards significantly. READ MORE

  4. 4. Recycling of concrete waste with wood waste through heating compaction

    University essay from KTH/Betongbyggnad

    Author : Li Liang; [2020]
    Keywords : Recycling; Concrete waste; Wooden waste; Heating powder compaction;

    Abstract : Concrete, as primary building material, is widely used in most construction project. For this reason, large amounts of concrete waste were generated from construction and demolition. One way to reuse concrete waste is to use it as backfill material for landfilling and road bases. READ MORE

  5. 5. On the use of compensated machining paths to alleviate three-lobed deformations

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Andreea Ilie; [2020]
    Keywords : 3-jaw fixtures; asymmetric deformation; compensated path; milling; tolerances;

    Abstract : During turning, the neck of a workpiece is ​three-lobed deformed due to the clamping pressure on the gripping jaws. While the workpiece is deformed, the machining tool will cut along a preprogrammed circular path. After removal from the chuck, the material returns to its original shape thus deforming the circular path. READ MORE