Essays about: "Sandwich design"

Showing result 1 - 5 of 37 essays containing the words Sandwich design.

  1. 1. 4-Point Bending of Composite Laminates for FEM/FEA Validation

    University essay from Högskolan i Halmstad/Akademin för företagande, innovation och hållbarhet

    Author : Pierce Cashin; [2023]
    Keywords : composites; 4-point bending; fiberglass; sandwich panel;

    Abstract : When designing structures and vehicles using composite materials, engineers need access to critical information regarding the composite materials in question. This information describes the strength, stiffness, failure mode, and other variables that can be used to properly determine how a structure will perform while undergoing various loads and effects. READ MORE

  3. 2. Reduction of Explosion Effects by Use of a Sandwich Wall

    University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaper

    Author : Annie Bohman; [2023]
    Keywords : Explosion Blast load Sandwich wall Energy absorption; Technology and Engineering;

    Abstract : It was recently decided that a new hospital is to be built in Växjö. It is important that hospitals can be utilised no matter the circumstances, even in situations of threat. New reports have been published concerning how hospitals are to be designed. In this, it is mentioned that explosions are a threat that should be considered. READ MORE

  4. 3. Characterization of Kelvin Cell Cored Sandwich Structures with Analysis and Experiments

    University essay from KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanik

    Author : Sabahattin Bora Günay; [2023]
    Keywords : Kelvin Cell; Sandwich Structure; Space Structures; Three Point Bending Test; Structural Stiffness; Kelvin-cell; smörgåsstruktur; rymdstrukturer; trepunktsböjningstest; strukturell styvhet;

    Abstract : In order to satisfy the mechanical requirements for space structures, achieving lightweight designs is of the greatest significance. The primary focus of this study is the utilization of Kelvin cell core in the design of sandwich structures for space applications. READ MORE

  5. 4. Wide-Angle Radome Design for Low-Cost Additive Manufacturing

    University essay from Lunds universitet/Institutionen för elektro- och informationsteknik

    Author : Martin Fajerberg; Mattias Nylander; [2022]
    Keywords : Radar; Radome; A-Sandwich; B-Sandwich; Multilayer; Polarization; Angle of Incidence; Finite Element Method; Differential Evolution Optimization; Transmission Line Theory; Honeycomb; Additive Manufacturing; Electromagnetic Theory; Technology and Engineering;

    Abstract : The radome, a portmanteau of the words radar and dome, is a protective dielectric cover to protect a radar from its surrounding environment. The surrounding environment can be rain, wind, sand, dust and whatever else that might harm the radar. READ MORE

  6. 5. Effectivization of GAD ELISA : Method-transfer from Dynex DSX to Tecan Freedom EVOlyzer

    University essay from Malmö universitet/Fakulteten för hälsa och samhälle (HS)

    Author : Juan Manuel Bernal Salazar; [2022]
    Keywords : Effectivization; Antibodies; ELISA; GAD; GAD65; Method transfer; Type 1 Diabetes Mellitus;

    Abstract : Due to a growing demand and need for faster results, effectivization as a concept has been pushed to the forefront of medical research. Here, a method transfer between 2 fully automized ELISA instruments is highlighted. The instruments were the Tecan Freedom EVOlyzer and the Dynex DSX. READ MORE