Essays about: "Shear wall"

Showing result 11 - 15 of 50 essays containing the words Shear wall.

  1. 11. FE-Modelling of a Joint for Cross-Laminated Timber

    University essay from Karlstads universitet/Avdelningen för maskin- och materialteknik

    Author : Linus Ekhagen; [2021]
    Keywords : cross-laminated timber; fe-modelling; continuum damage mechanics; fracture; korslimmat trä; fe modellering; skademekanik; brott;

    Abstract : Woodbe Engineering AB is a freshly started company that has developed a new type of joint for cross-laminated timber (CLT). The joint does not include any metallic fasteners, which improves sustainability, the ergonomics for the workers and time efficiency. READ MORE

  3. 12. Modeling the Effects of a MitraClip™ : Simulations of the Blood Flow in the Left Ventricle After MitraClip™ Therapy

    University essay from KTH/Skolan för teknikvetenskap (SCI)

    Author : Samuel Eriksson Lidbrink; Ludvig Lindström; [2021]
    Keywords : ;

    Abstract : As heart disease is the leading cause of death worldwide it is of great interest to improve our understanding and treatment of different heart conditions. One step in doing this might be developing computational models of how the blood flows in the heart. This paper builds upon prior models by Larsson et al. (2017) and Svelander et al. READ MORE

  4. 13. CFD Simulation of Particles in Pipe Flow and Mixing Tank

    University essay from Linköpings universitet/Mekanisk värmeteori och strömningslära

    Author : Aljaz Janic; [2020]
    Keywords : Multiphase flow; particles; TetraPak; mixing tank; pipe flow;

    Abstract : This project aimed to investigate the capability of the STAR CCM+ software when predicting the flow with particles using Lagrangian Particle Tracking and Discrete Element Method. The first part pertained to rectangular channel flow, with ratio between height of the channel and particle diameter (2h/Dp ) of 15. READ MORE

  5. 14. Effects of cracking of coupling beams onhigh rise towers subjected to wind load

    University essay from KTH/Betongbyggnad

    Author : Brook Worku Woldemikael; [2020]
    Keywords : Crack; reinforcement content; aspect ratio; shear deformation; joint flexibility; concrete grade; effective stiffness.; Sprickor; förstärkningsinnehåll; tvärsnittsförhållande; skjuvdeformation; ledflexibilitet; betongkvalitet; effektiv styvhet;

    Abstract : In high rise towers, reinforced concrete elevator shafts with coupling beams are extensively used as a principal structural element to resist lateral loads. The lateral load resistance of the tower is dominantly dependent on the stiffness of the load-bearing walls, and coupling beams connecting them. READ MORE

  6. 15. Analysis of wall-mounted hot-wire probes

    University essay from KTH/Strömningsmekanik och Teknisk Akustik

    Author : Alvisi Alex; Perez Adalberto; [2020]
    Keywords : Turbulent Boundary layer; Turbulent Channel Flow; Hot Wire Anemometer; Direct Numerical Simulations; Immersed Boundary Method;

    Abstract : Flush-mounted cavity hot-wire probes have been around since two decades, but have typically not been applied as often compared to the traditional wall hot-wires mounted several wire diameters above the surface. While the latter suffer from heat conduction from the hot wire to the substrate in particular when used in air flows, the former is belived to significantly enhance the frequency response of the sensor. READ MORE