Essays about: "Skärande bearbetning"

Showing result 1 - 5 of 12 essays containing the words Skärande bearbetning.

1. 1. Investigation of the Microstructure of Plastically Deformed Cemented Carbide

   University essay from KTH/Materialvetenskap

   Author : Felicia Larsson; [2023]
   Keywords : ;

   Abstract : During machining operation, cemented carbide tools are exposed to high loads and temperatures, which eventually leads to plastic deformation of the tool material. The aim of this work was to investigate if the microstructures of creep deformed micro grain cemented carbides can be linked to alloying elements and mechanical properties. READ MORE

3. 2. Evaluation of Refined Tribological Properties of Diamond Coated Cutting Tools Used in Machining of High-Strength Aluminum Alloys : Master thesis report regarding refined frictional & wear behavior of uncoated & CVD diamond coated WC-Co cemented carbide cutting tools used for machining of Al 7xxx alloys.

   University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)

   Author : Christian Hultman; [2022]
   Keywords : tribology; machining; metal cutting; turning; milling; friction; wear; material transfer; surface technology; tribologi; skärande bearbetning; svarvning; fräsning; friktion; förslitning; nötning; materialöverföring; ytteknologi;

   Abstract : High strength aluminum alloys have for a long time been a popular material utilized in the automotive and aerospace sector due to coveted mechanical properties in terms of weight, strength, fatigue, and corrosion. However, tribological mechanisms such as tribo-film formation and material transfer during the metal cutting manufacturing process of aluminum impose significant reduction of machining and tool-life performance. READ MORE

4. 3. Axial cutting force in drilling operation

   University essay from Lunds universitet/Industriell Produktion

   Author : Heaven Frezgi; Bharath Gelli; [2021]
   Keywords : Axial cutting force; Drilling; Model optimization.; Technology and Engineering;

   Abstract : Metal cutting has been part of industrial development since the iron age. Since then, it has changed shapes and criteria, but efficiency in metal cutting has been one of the biggest goals in the industrial world for just as long. To have maximum efficiency requires some level of process behavior prediction, which inspired the degree project. READ MORE

5. 4. Simulation of Residual Stresses in Cemented Carbide

   University essay from KTH/Teknisk mekanik

   Author : Emma Lundin; [2021]
   Keywords : ;

   Abstract : Cemented carbides are used in a multitude of applications within machining as they can withstand tough conditions. Therefore, the stress state in a virgin material is of interest. READ MORE

6. 5. Cooling Strategy Influence on Temperature in ETD Center

   University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

   Author : Oskar Edinger; [2021]
   Keywords : Machining; Drilling; Exchangeable tip drill; 316L Stainless steel; Thermocouple; IR Thermography; Skärande bearbetning; Borrning; Löstoppsborr; 316L Rostfritt stål; Termoelement; IR Termografi;

   Abstract : Striving for increased productivity while maintaining hole quality and high process robustness when drilling requires knowledge about the working principles of heat generation, mechanics and a proper cutting fluid that aids in cooling, lubricating and evacuating chips from the cutting zone. If the heat generated in the tool-workpiece and tool-chip interfaces does not exit the cutting zone adequately through the chips, the workpiece material or the redistribution of coolant the hole quality can be impacted negatively and breakdowns may occur which reduces overall productivity. READ MORE