Essays about: "Stamping die"
Showing result 1 - 5 of 9 essays containing the words Stamping die.
-
1. Steel 3D-Printing : Evaluation of Metal Additive Manufacturing(MAM) capabilities on Automotive Spares
University essay fromAbstract : The primary intention behind performing this thesis is to identify possibilities of implementing Metal Additive Manufacturing (MAM) in automotive industries in spare part manufacturing. This project tries to analyse the differences between conventional and contemporary manufacturing techniques. READ MORE
-
2. Implementation of nut piercing from below in a stamping die : A case study at Volvo Car Body Components
University essay from Linnéuniversitetet/Institutionen för maskinteknik (MT)Abstract : In today's car industries, low investment costs and high production rates are sought. By using nut piercing in the stamping dies in the manufacture of body components, otherwise necessary subsequent tempos can be reduced. READ MORE
-
3. Measuring the contact pressure during sheet metal forming of automotive components
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : The competition in the car market in the world is continuously intensifying. To gain an advantage in the market while making a profit, each car manufacturer needs a strong focus on always improving in the technology development. READ MORE
-
4. Relation Between the Material in Press Hardening Dies and Fully Martensitic Transformation : Sheet properties of thick 3D-sheets in small series production
University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Abstract : This report evaluates the influence of the die material on the cooling rate and martensitic transformation of press hardened sheets. The goal was to increase the thicknesses of sheets that can form fully martensitic microstructure when press hardened. READ MORE
-
5. Extraction of tool reaction forces using LS-DYNA and its use in Autoform sheet metal forming simulation
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : In product development there is still potential to decrease lead times with faster and more accurate simulations. The objective of this thesis was to study whether Finite Element (FE) simulations using explicit LS-DYNA to extract reaction forces from sheet metal forming tools during forming, could be used to improve existing FE models in sheet metal forming software AutoForm. READ MORE