Essays about: "Swirl Blade"
Found 3 essays containing the words Swirl Blade.
-
1. Validation of CFD simulation with PIV measurements for Open Rotor Noise Predictions
University essay from KTH/MekanikAbstract : CROR means Contra--‐Rotating Open Rotor. Its efficiency is better than usual in aeronautics thanks to its geometry (open rotor and thus high bypass ratio) but also by adding a second rotor. Indeed it enables to recover the swirl loss of the first rotor. However, this engine is rarely used today in civil aviation for acoustic reasons. READ MORE
-
2. Two Dimensional Design of Axial Compressor - An Enhanced Version of LUAX-C
University essay from Lunds universitet/Institutionen för energivetenskaperAbstract : The main scope of this thesis is to have a strong tool for a preliminar design and sizing of an axial compressor in a bi-dimensional way, this means that all the parameters are referred to the hub, to the midspan and to the tip of the blade. This goal has been reached improving a pre existent MatlabTM code based on a monodimensional design. READ MORE
-
3. Plant Experiment Using a Swirl Blade in the Uphill Teeming Process
University essay from KTH/MaterialvetenskapAbstract : The purpose of this thesis has been to evaluate the use of a swirl blade in the uphill teeming process through plant trials. Two series of trials were carried out at Scana Steel Stavanger AS. In the trials a divergent entrance nozzle with a 62° outlet angle were used when casting duplex stainless steel on a base plate with two 6.2 tons ingots. READ MORE