Essays about: "Thermal Efficiency"

Showing result 21 - 25 of 380 essays containing the words Thermal Efficiency.

1. 21. Solar industrial heating with a hybrid solar collectors’ configuration and thermal storage : Dynamic simulation and techno-economic analysis

   University essay from Högskolan i Halmstad/Akademin för företagande, innovation och hållbarhet

   Author : Gisela Subirats Gonzalez; [2023]
   Keywords : Solar thermal; Thermal Energy Storage; TES; PV; Brenmiller; Absolicon.;

   Abstract : This study investigates the feasibility and performance of a hybrid system integrating photovoltaic (PV) and solar thermal technologies for industrial process heat. By analyzing various parameters including cost, income, energy production, and system specifications, valuable insights are obtained. READ MORE

3. 22. The Development and Testing of Low-Cost Heat Transfer Enhancements for Solar Dryers

   University essay from Lunds universitet/Institutionen för energivetenskaper

   Author : Hoda Mahmoodi; [2023]
   Keywords : Solar dryer; Bhutan; Drying rate; Solar absorber; Technology and Engineering;

   Abstract : In the mountainous regions of Bhutan and Nepal, post-harvest losses cause significant challenges for producers. Open air sun drying is usually used by farmers to preserve their produce. There are many disadvantages to this method. READ MORE

4. 23. Flexible Sector Coupling (FSC) of Electrical and Thermal Sectors via Thermal Energy Storage (TES) : A Case Study on Oskarshamn Energi

   University essay from KTH/Skolan för industriell teknik och management (ITM)

   Author : Raúl Calvo García; Jose María Marín Arcos; [2023]
   Keywords : Flexible sector coupling FSC ; district heating DH ; thermal energy storage TES ; heat pump HP ; capacity optimization; dispatch optimization; open-access tools; Flexibel sektorkoppling; fjärrvärme; termisk energilagring; värmepump; kapacitetsoptimering; leveransoptimering; verktyg med öppen tillgång;

   Abstract : The integration of distributed energy sources and systems is of high relevance for the transition towards a more sustainable energy system. Taking into consideration the  amount of emissions produced by the heating sector, which account for at least half of the energy demand in buildings, district heating systems have the potential to play a key role in the transition, by enabling the integration of various energy sources and provide flexible energy services to the grid. READ MORE

5. 24. Assessment of the integration of solar heat power into food drying processes

   University essay from Lunds universitet/Institutionen för energivetenskaper

   Author : Charalampos Psilopoulos; [2023]
   Keywords : Sustainable; sustainability; co2 reduction; feasibility; solar thermal; direct steam generation; drying; food industry; scope 1 emissions; sdg; sustainable development goals; spray drying; drum drying; powder; food; Technology and Engineering;

   Abstract : The long-lasting usage of fossil fuels has brought its negative impact on the planet and thus the society is turning towards more environmentally sustainable solutions in every aspect of life. This master’s thesis discusses the novel topic of integrating concentrated solar thermal collectors, which directly produce steam, to drying processes in the food industry, which is proven to currently emit significant amounts of Greenhouse Gases (GHGs). READ MORE

6. 25. Study on Decolorization of Reactive-dyed Cotton through Fenton-oxidation as a Pre-treatment for Textile Recycling

   University essay from Högskolan i Borås/Akademin för textil, teknik och ekonomi

   Author : Elise Meurs; [2023]
   Keywords : Fenton-oxidation; advanced oxidation processes; decolorization; textile recycling; cotton; reactive dye;

   Abstract : In this master thesis, the feasibility of Fenton-oxidation for the decolorization of reactive dyed cotton is investigated as a potentially environmental-friendly preparatory treatment for mechanical/chemical recycling. Raw, knitted cotton is dyed with a black and a blue dye, whereafter preliminary tests are performed to investigate the influence of increasing Fenton- solution concentrations and different iron-sources on the efficiency of the discoloration, without carrying out complete optimization of the process-parameters. READ MORE