Essays about: "Timber structures"
Showing result 11 - 15 of 92 essays containing the words Timber structures.
-
11. PERMAFROST ARCHITECTURE: EXPLORING RAISED STRUCTURES TO DEVELOP A DESIGN METHOD FOR BUILDING AN ARTS CENTRE ON SVALBARD
University essay from KTH/ArkitekturAbstract : .... READ MORE
-
12. Composite timber structures – Ribbed plate design : Evaluation of existing and development of new design methods
University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)Abstract : Ribbed plates comprising cross-laminated timber slab, CLT, with glulam beams allow for increased span length compared to pure CLT slabs. At the moment the Eurocodes do not provide any recommendations to design a CLT plate or a ribbed plate. There are handbooks for designing ribbed plates. READ MORE
-
13. Correlation between measured and perceived impact sound in schools
University essay from Luleå tekniska universitet/TräteknikAbstract : This project investigated the correlation between measured impact sound insulation and perceived walking sound annoyance in schools. The correlation was tested by performing standardized impact sound insulation measurements for different floor structures and comparing the measurement results with subjective perception of recorded walking for the same floor structures. READ MORE
-
14. Structural strengthening and sustainability improvements of existing buildings – A case study
University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)Abstract : In Sweden, a large share of residential buildings was built more than 50 years ago. Consequently, old materials, poor maintenance, and corrosion can affect the structural performance of these buildings. Additionally, these buildings do not meet the latest energy efficiency and Eurocode regulations. READ MORE
-
15. Moment-resisting connections for glulam using birch plywood : An experimental study on both mechanical and adhesive connections
University essay from KTH/ByggnadsmaterialAbstract : The aim of this study was to investigate the load-bearing capacity and stiffness of mechanical and adhesively bonded connections in timber structures with gusset plates made of birch plywood, as a preliminary study for potential future use in long-span timber structures which could reduce the environmental impact of the building sector by substituting steel with wood products in moment-resisting connections. Birch plywood was chosen for this study due to its high bending strength in comparison to plywood made of softwoods and its availability on the market. READ MORE