Essays about: "Tooling AB"

Showing result 1 - 5 of 11 essays containing the words Tooling AB.

  1. 1. Pre-Straining Operation : Prediction of Strain Paths Within a Forming Limit Diagram

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Elin Olofsson; Mohammed Al-Fadhli; [2022]
    Keywords : Forming Limit Diagram; Forming Limit Curve; Non-Linear Strain Paths; Pre-Straining; Sheet Metal Forming.;

    Abstract : In a Sheet Metal Forming (SMF) operation, complex geometries in multi-stage forming processes are mostly common. Forming a blank, major and minor straining willoccur. Follow the straining of the blank elements over the forming process will provide its strain paths. READ MORE

  3. 2. Comparing the Effectiveness of Punching to Laser Cutting in UltraHigh Strength Steel

    University essay from KTH/Materialvetenskap

    Author : Felix Öhman; [2021]
    Keywords : ;

    Abstract : This study examines the efficiency of punching compared to laser cutting in sheets of Ultra High Strength Steel (UHSS). The study was conducted to determine which process is more efficient with respect to sheet thickness, where the quality of the cut edge is also taken into consideration of whether punching is recommended over laser cutting. READ MORE

  4. 3. Spiral Groove Bearing Multiphysics Modeling

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Mohamed Yousri Abdelmeguid Mohamed; [2019]
    Keywords : ;

    Abstract : Cone crushers are widely used in the mining, mineral processing and quarrying segments of the industry to crush ores and large rocks. In such machinery, the load to be carried is rather heavy and the motion is gyratory which creates a need for a bearing set that can withstand such severe conditions. READ MORE

  5. 4. Thermal characterization and comparison of different advanced composites for tooling applications

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Jorge Valilla; [2019]
    Keywords : ;

    Abstract : The aim of this study if to give a comparison between different kind of high composite laminates (thin ply and conventional thickness plates) for tooling applications. The study mainly deals with the thermal behaviour of these materials after certain amount of time of exposure, and how this can affect the mechanical properties. READ MORE

  6. 5. Towards Sustainability Using Minimum Quantity Lubrication Technique and Nano-Cutting Fluids in Metal-Machining Processes

    University essay from KTH/Industriell produktion

    Author : Marta García Tierno; [2018]
    Keywords : Manufacturing; Machining; Turning; Minimum Quantity Lubrication; Nanoparticles.;

    Abstract : Sustainable manufacturing is making products from processes which have minimal environmental impact, energy and resource efficient, economically viable and safe for consumers and society as whole. Achieving sustainability in manufacturing would mean infusing sustainability methods on product process and system level. READ MORE