Essays about: "adhesion"

Showing result 21 - 25 of 178 essays containing the word adhesion.

1. 21. Moment-resisting connections for glulam using birch plywood : An experimental study on both mechanical and adhesive connections

   University essay from KTH/Byggnadsmaterial

   Author : Jonatan Ringaby; [2022]
   Keywords : ;

   Abstract : The aim of this study was to investigate the load-bearing capacity and stiffness of mechanical and adhesively bonded connections in timber structures with gusset plates made of birch plywood, as a preliminary study for potential future use in long-span timber structures which could reduce the environmental impact of the building sector by substituting steel with wood products in moment-resisting connections. Birch plywood was chosen for this study due to its high bending strength in comparison to plywood made of softwoods and its availability on the market. READ MORE

3. 22. Analysis of Stiffness Measurement Methods on Extracellular Vesicles

   University essay from KTH/Tillämpad fysik

   Author : Hanna Kylhammar; [2022]
   Keywords : Extracellular Vesicles; AFM; Atomic Force Microscopy; Fluorescent Microscopy; Extracellulära Vesiklar; AFM; Atomkraftsmikroskopi; Fluorescensmikroskopi;

   Abstract : Extracellular vesicles are important players in cell-to-cell communication and have the potential to be used as biomarkers for decease. The mechanical properties of extracellular vesicles is an active field of research, with new methods and models being developed. READ MORE

4. 23. Design of 3D-Printed Components : Resistances, Strain Gauges and Touch sensors

   University essay from KTH/Skolan för elektroteknik och datavetenskap (EECS)

   Author : Joar Forsberg; [2022]
   Keywords : 3D-printing; FFF; Conductive PLA; Strain Gauge; Touch sensor; 3D-printing; FFF; Konduktiv PLA; Töjningsgivare; Vidröringssensor;

   Abstract : Additive manufacturing has recently become an increasingly available, affordable, and versatile technology for industry and enthusiasts alike. One opportunity that this provides is using conductive filament to print electronic sensors and components. READ MORE

5. 24. Mechanical and tribological characterization of additive manufactured Co-alloyed tool steels aimed for cutting tool bodies

   University essay from Högskolan Dalarna/Institutionen för information och teknik

   Author : Jijesh Rajan; [2022]
   Keywords : Maraging steels; Selective laser melting; microstructure; wear; Modified 18Ni300; Osprey MAR;

   Abstract : A drill tool body operates under tough cutting conditions where it is subjected to severe rubbing at the drill flute margin by the sliding chips. The tool wear caused by the contact stresses of the high-speed sliding chips is one of the common damage mechanisms observed in drill tool bodies. READ MORE

6. 25. Additive Manufacturing of Strain Gauges : A Study of the Feasibility of Printing Strain Gauges Using Inkjet Printing

   University essay from Uppsala universitet/Institutionen för materialvetenskap

   Author : Karin Wennersten; [2022]
   Keywords : Additive manufacturing; strain gauge; inkjet; IJP; AJP; aerosol jet;

   Abstract : Additive manufacturing (AM) also commonly known as 3D-printing is a manufacturing method which creates parts from adding layer into another. In the field of printed electronics Inkjet printing (IJP) and Aerosol Jet printing (AJP) are the most common AM techniques. READ MORE