Essays about: "cfd ansys fluent"

Showing result 16 - 20 of 70 essays containing the words cfd ansys fluent.

  1. 16. Design of flow guiding parts through CFD topology optimisation

    University essay from KTH/Fordonsdynamik

    Author : Aby Narayamparambil; [2021]
    Keywords : Topology optimisation in CFD; Ansys Fluent; Tosca Fluid; Particle track; Backflow tolerance; Topologi optimering i CFD; Ansys Fluent; Tosca Fluid; Particle track; Återflödets tolerans;

    Abstract : Scania works continuously to develop internal combustion engines and after treatment systems which can achieve low pollutant emissions and high efficiency. A major principal that Scania adopted for this goal is the Simulation Driven Development (SDD) process. READ MORE

  3. 17. ANSYS Fluent usage in product development : Aqualitative analysis of Volume of Fluidsimulations in the internal design of a dry toilet

    University essay from KTH/Hållbar produktionsutveckling (ML)

    Author : Daniele Origuella; [2021]
    Keywords : ANSYS Fluent; product development; VOF; ANSYS Fluent; Produktframtagning; VOF;

    Abstract : The World Health Organization estimates that over two billion people did not have access to a toilet in 2017. The dejects produced often end up in bodies of water and, as one in every ten crops is watered with wastewater, this is estimated to cause half a billion deaths per year. READ MORE

  4. 18. CFD Simulation of a Fin-Tube Evaporator under icing

    University essay from Linköpings universitet/Mekanisk värmeteori och strömningslära

    Author : Abhay Mahesh Hervatte; [2021]
    Keywords : CFD; Refrigeration; HVAC; Evaporator; Thermodynamics; Icing;

    Abstract : The study involves development of a methodology to simulate a fin-tube evaporator under icing conditions using CFD in Ansys® Academic Fluent 2021R1. It aims to build on previous studies performed on heat pumps. It was performed by Abhay M. Hervatte in collaboration with Bosch Thermoteknik AB, Tranås, SE during the spring term of the year 2021. READ MORE

  5. 19. Numerical modelling for characterization of the granular flows impact on the gas flow in a packed-bed-reactor

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Anton Sundström; [2020]
    Keywords : DEM; Discrete element method;

    Abstract : The goal of the project was to characterize the granular flows impact on the gas flow in a packed-bed-reactor. The study was created at Swerim as a master's thesis for Luleå University of Technology. The packed-bed-reactor geometry used in this study is a scaled down blast furnace model. READ MORE

  6. 20. Numerical Study on Air Demand of Free Surface Flows in a Discharge Tunnel

    University essay from Uppsala universitet/Institutionen för fysik och astronomi

    Author : Jonathan Barassa; Rickard Nordlöf; [2020]
    Keywords : Computational Fluid mechanics; Hydropower; Air demand; Free surface flows; ANSYS Fluent;

    Abstract : Aeration issued through a ventilation shaft is an important measure to prevent cavitation and large gauge pressure in flood discharge tunnels. In order to dimension the ventilation shaft appropriately, itis necessary to have a good understanding of the air-water flow in the tunnel. READ MORE