Essays about: "corrosion mechanisms"

Showing result 1 - 5 of 21 essays containing the words corrosion mechanisms.

1. 1. Effect of temperature on early stage adhesion during TiAlN sliding against Inconel 718 and Stainless steel 316L : High temperature tribology

   University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

   Author : Ahsan Ali; [2023]
   Keywords : High temperature tribology; Early-stage adhesion; Adhesive wear; Friction; Wear resistant coatings; Physical vapour deposition PVD coatings; TiAlN; Tungsten carbide WC Co ; Difficult to machine super alloys; Inconel 718; Stainless steel 316L; High-performance materials; Abrasion; Oxidation; Chipping; Ploughing; Characterization;

   Abstract : High-performance materials such as stainless steels and nickel based super alloys are widely used in demanding applications where high mechanical and thermal properties are required. The applications of super alloys are mainly found in jet engines, power plants and gas turbines demanding high fatigue strength, corrosion and oxidation resistance as well as wear resistant properties. READ MORE

3. 2. High Temperature Tribology of Exhaust Components in Alternative Fuel Engines

   University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

   Author : Muhammad Hashir Zaheer; [2023]
   Keywords : High temperature tribology; Wear; Friction; Exhaust manifold; Lip seal ring; Wear resistant coatings; Inconel 718c; SiMo51 ductile cast iron; AlTiN; Tribaloy 400;

   Abstract : Internal Combustion Engine (ICE) exhaust components are exposed to extreme operating temperatures. Thus, it is necessary that they are designed with materials that can sustain thermal and vibrational stresses. READ MORE

4. 3. Evaluation of Crack Depth Meter - An investigation of the crack depth meters possibilities and limitations for commonly occurring damage mechanisms

   University essay from KTH/Hållfasthetslära

   Author : Alfred Norberg; [2023]
   Keywords : Crack depth measurement; RMG 4015; ACPD; Damage Mechanism; Evaluation; FEM Simulation; Sprickdjupsmätning; RMG 4015; ACPD; Skademekanism; Utvärdering; FEM-simulering;

   Abstract : In this master thesis, the accuracy of the crack depth meter RMG 4015 was evaluated for different types of cracks with various damage mechanisms. In total, 61 crack depth measurements were conducted with the crack depth meter on 56 cracks which were located in the 23 different test pieces supplied by Kiwa. READ MORE

5. 4. Dependence of Degradation Mechanisms in Magnesium Alloys on Grain Orientation and Interfaces in 3D

   University essay from Lunds universitet/Materialteknik

   Author : Johan Ranstad; [2023]
   Keywords : Mg-Zn alloys; Diffraction contrast tomography; Isothermal Calorimetry; Immersion testing; Corrosion Rate; Microgalvanic coupling.; Technology and Engineering;

   Abstract : Magnesium alloys are promising candidates as biomedical implants. However, a good understanding of their degradation processes is lacking. In this work, degradation in two magnesium alloys were studied in a simple physiological-fluid electrolyte of H2O+0.9wt%NaCl, Mg-5wt%Zn (Z5) & Mg-5wt%Zn-0. READ MORE

6. 5. Long-term Effect of Metallic Iron Sorbents on Arsenic Mobility in an Anoxic Aquifer : An assessment based on long-term column experiments

   University essay from SLU/Dept. of Soil and Environment

   Author : Stéphanie Nyström; [2022]
   Keywords : Zero valent iron; ZVI; Remediation; Anoxic; Column tests; ICP-MS;

   Abstract : Zero valent iron (ZVI) sorbents have successfully remediated soils burdened with different groups of contaminants. When working to alleviate arsenic (As) contamination, the location-specific subsurface chemistry greatly affects the efficiency of the sorbents as it controls the speciation of As and the transformation of the ZVI, as well as the interaction between these (remediating mechanisms). READ MORE