Essays about: "cross-laminated timber"
Showing result 16 - 20 of 65 essays containing the words cross-laminated timber.
-
16. Evaluation of a testing method for shear stiffness properties for cross laminated timber
University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaperAbstract : Cross laminated timber (CLT) is an engineered wood product that was first developed in the 1990s. Since then it has grown in popularity thanks to its many advantages such as: low environment impact, high degree of prefabrication and low weight. As the material is relatively new the standardization process is still in the early stages. READ MORE
-
17. Life cycle analysis and comparison of climate impact for two alternative floor systems for increased weight in high-rise timber buildings
University essay from KTH/ByggnadsmaterialAbstract : The aim of this Master Thesis is to investigate and quantify the climate impact for two floor system alternatives for the Cederhusen project, that is the 8 floors timber-based buildings located at Sankt Eriksplan in Stockholm. The overall motivation for this study is the fact that the construction industry is a major contributor to the total amount of the global greenhouse gas emissions. READ MORE
-
18. Attenuation of bending waves in cross-laminated timber panels by using constrained damping layer
University essay from Luleå tekniska universitet/TräteknikAbstract : Multi-storey wooden buildings become more and more popular. As the new housing solutions are more accessible, acoustical inconveniences of wooden buildings become actual as never before. Wood, thanks to its high stiffness and low mass, allows to erect buildings at impressive pace, albeit cannot damp low frequency noises efficiently. READ MORE
-
19. CHARACTERISATION OF CROSS LAMINATED TIMBER PROPERTIES
University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaperAbstract : This project concerns an analysis of a hitherto untested method for determining the modulus of elasticity (MoE) and shear modulus parallel to grain, as well as the rolling shear modulus of cross laminated timber (CLT) through 3-point bending tests. A review of analytical models and methods is included, followed by an evaluation of the effect of the annual ring orientation and shear stress distribution at shear loading of individual board cross-sections. READ MORE
-
20. Modelling and testing of CLT panels for evaluation of stiffness
University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)Abstract : The use of timber in building structures is steadily increasing. cross laminated timber (CLT) is an engineered wood product made of an uneven number of layers of lamellas glued at an angle of 90 degrees to each other. READ MORE