Essays about: "design for casting"
Showing result 11 - 15 of 57 essays containing the words design for casting.
-
11. Performance of 3D printed concrete formworks for bridge pillars focusing on casting
University essay from KTH/BetongbyggnadAbstract : In this context, the main objective of this project is to determine if 3D printed concreteformworks are able to not fall apart and later withstand the stresses produced byC40/50 and selfcompactingconcrete (SCC) castings. The purpose is to check thesuitability of this method applied to the construction of bridge pillars and its capabilityof covering and protecting the reinforcement placed in the casting. READ MORE
-
12. Design Solution for Ingot Handling and Machining
University essay from Karlstads universitet/Avdelningen för maskin- och materialteknikAbstract : At the electro remelting slag (ESR) facility at Uddeholm, cylindrical steel ingots are produced in several different sizes. The ESR process requires a “starting step” that consist of a 20mm thick steel plate and is a little larger than the diameter of the ingot. READ MORE
-
13. Product Development and Finite Element Analysis of Polyurethane Press Shoe : Produktutveckling och finit element analys av press-sko i polyuretan
University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Abstract : The press-section of a paper machine holds several different types of press rolls. One of the many press roll variants is the Valmet produced press roll, ViscoNip. This press roll utilizes an extended nip in order to increase the amount of water removed. READ MORE
-
14. Concept Design Improvement of Shift Fork for New Dog Clutch Actuator : Simulation driven product development approach
University essay from Jönköping University/JTH, Industriell produktutveckling, produktion och designAbstract : Kongsberg Automotive is developing a brand-new actuator for engaging and disengaging a clutch for different driveline applications. This master thesis research improves the concept design of the shift fork for the new Dog-Clutch Actuator using Design for Manufacturability (DFM). READ MORE
-
15. Object Selection by Relative Hand to Cursor Mapping : Design and Evaluation of a 2D-Object Selection Technique for Hand Tracking in Virtual Environments
University essay from KTH/Skolan för elektroteknik och datavetenskap (EECS)Abstract : Hand and tracker jitter negatively affect performance with ray-casting in virtual environments, making it difficult to acquire small objects which require high levels of precision. This study evaluates an alternative target acquisition technique for 2D-interfaces in virtual environments with relative hand-to-cursor mapping. READ MORE