Essays about: "fe-modelling"
Showing result 1 - 5 of 27 essays containing the word fe-modelling.
-
1. FE-Modelling of Composite Girder tests
University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserAbstract : Many of the existing steel-concrete bridges may need to be strengthened, as heavier vehicles areallowed on the Swedish roads. These bridges could possibly be strengthened by post-installingshear connectors. The shear connectors may enhance the load-bearing capacity through a higherdegree of composite action between the steel and concrete interface. READ MORE
-
2. FE-modelling of glulam connection in a pre-tensioned glulam truss : Detailed Finite element modelling of the connection between primary beam and compression stud in a sub-tensioned glulam roof truss
University essay from KTH/Bro- och stålbyggnadAbstract : After the collapse of the roof structure in Tarfalahallen 2020, great attention has been focused on instability of sub-tensioned glulam roof trusses. Investigations were launched to find the reason for the collapse and the cause was instability in the roof truss that supported the roof. READ MORE
-
3. EVALUATION OF ENVIRONMENTAL AND TECHNICAL PERFORMANCE OF ALTERNATE FIBRES FOR SHOTCRETE IN TUNNELS
University essay from KTH/BetongbyggnadAbstract : Tunnels in hard and jointed rock are normally excavated in an arch shape to enable the rock mass to support its weight. Since the beginning of the 1980's, fibre reinforced shotcrete (FRS) in combination with rock bolts have been the dominating support method for hard rock tunnels. READ MORE
-
4. Evaluation of a testing method for shear stiffness properties for cross laminated timber
University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaperAbstract : Cross laminated timber (CLT) is an engineered wood product that was first developed in the 1990s. Since then it has grown in popularity thanks to its many advantages such as: low environment impact, high degree of prefabrication and low weight. As the material is relatively new the standardization process is still in the early stages. READ MORE
-
5. Linear Impact of Bicycle Helmet – Experimental Testing and FE-modelling
University essay from KTH/HållfasthetsläraAbstract : The aim with this master thesis was to set up a FE-simulation of an impact test of a bike helmet in LS-DYNA that correlates well with the peak acceleration score of a real life impact test. Furthermore, a parametric study has been performed in LS DYNA to investigate the robustness of the model, as well as to see which parameters have a great influence on the peak acceleration score. READ MORE