Essays about: "nickel"

Showing result 1 - 5 of 245 essays containing the word nickel.

  1. 1. High levels of nickel from sulphide soil in Umeå's raw water : Modeling of groundwater flow and mass transport in Forslunda aquifer

    University essay from KTH/Hållbar utveckling, miljövetenskap och teknik

    Author : Merhawi Belai; [2024]
    Keywords : nickel; sulfide; sulphide; groundwater; modeling; mass transport; Feflow; Umeå; nickel; sulfid; monosulfid; grundvatten; modellering; masstransport; Feflow; Umeå;

    Abstract : The raw water in some of Umeå's abstraction wells has shown high nickel levels for more than a decade. The cause has not been determined but there is an investigation from 2010 where the results indicate sulphide clay found adjacent to two basins used for artificial infiltration. READ MORE

  3. 2. Effect of temperature on early stage adhesion during TiAlN sliding against Inconel 718 and Stainless steel 316L : High temperature tribology

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Ahsan Ali; [2023]
    Keywords : High temperature tribology; Early-stage adhesion; Adhesive wear; Friction; Wear resistant coatings; Physical vapour deposition PVD coatings; TiAlN; Tungsten carbide WC Co ; Difficult to machine super alloys; Inconel 718; Stainless steel 316L; High-performance materials; Abrasion; Oxidation; Chipping; Ploughing; Characterization;

    Abstract : High-performance materials such as stainless steels and nickel based super alloys are widely used in demanding applications where high mechanical and thermal properties are required. The applications of super alloys are mainly found in jet engines, power plants and gas turbines demanding high fatigue strength, corrosion and oxidation resistance as well as wear resistant properties. READ MORE

  4. 3. Risk assessment of non-intentionally added substances in polyester yarn made from recycled polyethylene terephthalate (PET)

    University essay from KTH/Skolan för kemi, bioteknologi och hälsa (CBH)

    Author : Kristina Arnqvist; [2023]
    Keywords : r-PET; polyester yarn; NIAS; risk assessment;

    Abstract : Polyester is a synthetic material made from polyethylene terephthalate (PET), which is synthesised from fossil raw materials. Many clothing manufacturers are using polyester in their clothing, which, from an environmental perspective, creates a non-sustainable cycle. READ MORE

  5. 4. Optimization of alloys recovery in steel scrap sorting : Technological, economic and environmental considerations for a better chromium, nickel and molybdenum recovery in steel scrap

    University essay from KTH/Materialvetenskap

    Author : Simone Quintè; [2023]
    Keywords : Steel scrap sorting; stainless steel; Chromium; Nickel; Molybdenum; alloys recovery; Laser Induced Breakdown Spectroscopy; revenue modeling; CO2 emissions modeling; Stålskrot Sortering; rostfritt stål; Krom; Nickel; Molybden; återvinning av legeringar; Laserinducerad nedbrytningsspektroskopi; intäktsmodellering; Modellering av CO2-utsläpp;

    Abstract : Today’s steelmaking industry is highly dependent on steel scrap supply. In order to reduce the greenhouse gas emissions (GHGs) deriving from the steel industry, it is of utmost importance to ensure that high percentages of steel scrap are recycled, reducing the reliance on the traditional ore-based steelmaking, which is significantly more environmentally impactful. READ MORE

  6. 5. Conceptualisation, Implementation and Commissioning of a Controlled Pyrolysis Rig : KTH Master Thesis Report

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : Arjun Monga; [2023]
    Keywords : coke deposition; pyrolysis; catalysis; methane; sample; cooling channels; regenerative cooling; rocket engines; koksavsättning; pyrolys; katalys; metan; prov; kylkanaler; regenerativ kylning; raketmotorer;

    Abstract : Liquid methane has seen popular interest from industry and academia as a next-generation rocket fuel due to its favorable performance characteristics and potential for extra-terrestrial in-situ resource utilisation. Since the rocket combustion chamber and nozzle are subject to high heat loads, regenerative cooling is a standard method to achieve lower temperatures. READ MORE