Essays about: "notched beam"

Showing result 1 - 5 of 7 essays containing the words notched beam.

  1. 1. Virtual Material Testing of Adhesive Joints

    University essay from KTH/Hållfasthetslära

    Author : Vinit Jethalal Nagda; [2020]
    Keywords : ;

    Abstract : The automotive industry has shown an increasing interest in adhesive bonding for mixed-material joining. Modern design methods are critically dependent on accurate material models and data for numerical methods to enable the simulation of a design prototype early in the design process. READ MORE

  3. 2. Characterization of thin laminate interface by using Double Cantilever Beam and End Notched Flexure tests

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Moiz Majeed; Rahitya Venkata Teja Geesala; [2020]
    Keywords : Double Cantilever Beam DCB ; End-Notched Flexure ENF ; Fracture toughness; Low density Polyethylene LDPE ; Three-point bending test;

    Abstract : This thesis is intended to identify the mode I and mode II fracture toughness to characterize the thin laminate interface by using the Double Cantilever Beam test (DCB) and End Notched Flexure test (ENF). This study’s thin laminate was Polyethylene Terephthalate and Low-Density Polyethylene (PET-LDPE), which is mostly used by packaging industries in the manufacturing of packages to store liquid food. READ MORE

  4. 3. Investigation of the mechanical performance of metal-composite joints

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Marc Olavide Rubio; [2017]
    Keywords : carbon fiber epoxy; AlSi-coated boron steel; metal-composite joints; double-cantilever beam test; end-notched flexural test; tensile test;

    Abstract : Composite materials are gaining the attention of several industries due to the high stiffness-to-weight and strength-to-weight ratios they offer. Especially in the automotive industry, demands on reduction of CO2 emissions is the major driving force towards lighter vehicles. READ MORE

  5. 4. Structural behavior of notched glulam beams reinforced by means of plywood and FRP.

    University essay from Institutionen för teknik, TEK

    Author : Maha Fawwaz; Adnan Hanna; [2012]
    Keywords : glued laminated timber; glulam; notch; finite element analysis; FRP; reinforcement;

    Abstract : Nowadays, timber is widely used in construction industry thanks to its availability and good properties. The use of solid (sawn) timber is not always proper since it is only available up to certain dimensions. Therefore, the so-called Engineered WoodProducts (EWPs) have been introduced to cope with the different design needs of structures. READ MORE

  6. 5. Stability of End Notched Flexure Specimen

    University essay from Institutionen för teknik och samhälle

    Author : Arun Gojuri; [2010]
    Keywords : Energy release rate; Finite element method; ENF-specimen; Delamination; Composite material; isotropic orthotropic; controlled displacement;

    Abstract : This paper deals with two-dimensional Finite Element Analysis of the End Notched Flexure (ENF) specimen. The specimen is known to be unstable if the crack length is shorter than some critical crack length acr. READ MORE