Essays about: "sieve analysis"
Showing result 1 - 5 of 10 essays containing the words sieve analysis.
-
1. Effect of mixing time and mixing rate on the evolution of powderproperties for binary adhesive mixtures
University essay from Uppsala universitet/Institutionen för farmaceutisk biovetenskapAbstract : Dry powder inhalers (DPIs) are often used to deliver drugs to the lungs when treating respiratory diseases. Inhalation powders are often formulated as adhesive mixtures which is the main formulation type used for dry inhalation powders of pharmaceuticals. READ MORE
-
2. Use of Polyvinyl chloride (PVC) as an aggregate for concrete
University essay from Högskolan i Borås/Akademin för textil, teknik och ekonomiAbstract : This study investigates the use of polyvinyl chloride (PVC) as a partial substitute of natural aggregates in concrete as fine and coarse aggregates. Concrete was prepared by replacing natural aggregates with equal volume of grinded PVC, with volume replacement ratio as 10%, 50% for fine and then 10% and 50% for coarse aggregates. READ MORE
-
3. Analyzing components of barrier coatings in different fractions during a repulping process.
University essay from Örebro universitet/Institutionen för naturvetenskap och teknikAbstract : During paper manufacturing, coating and adhesives are added to paper and cardboard to improve quality and durability. When the paper is later recycled or becoming new paper, the coatings may pollute the water used in the recycling process. Thus, it is important to know in which fraction these coatings finish during the process. READ MORE
-
4. Metal Powder Benchmarking
University essay from KTH/MaterialvetenskapAbstract : Metal additive manufacturing technologies are widely employed in the aerospace, automotive and medical industries. Selective laser melting is a type of metal additive manufacturing process in which powders are consolidated layer by layer in a predefined pattern with the help of a laser beam to create a component. READ MORE
-
5. Evaluation of alternative methods forquality control of Tungsten Carbide : An evaluation of four different particle measuring techniques
University essay from Luleå tekniska universitet/Institutionen för ekonomi, teknik och samhälleAbstract : The purpose of this study was to evaluate four different measuring methods as potentialquality control tests for Tungsten Carbide (WC) raw material used in the hard metalmanufacturing at Seco Tools Fagersta. This was warranted as the current quality testcalled the HcK test, is very time consuming and the results provided that are used formilling time calculations cannot be relied on. READ MORE