Essays about: "slow strain rate testing"

Showing result 1 - 5 of 10 essays containing the words slow strain rate testing.

  1. 1. Effect of Proton Irradiation on the Mechanical Properties of Fe-10Cr-4Al in Liquid Lead

    University essay from KTH/Fysik

    Author : Gabriela Lapinska; [2023]
    Keywords : Fe-10Cr-4Al; Lead; Radiation Damage; Slow Strain Rate Testing; Fe-10Cr-4Al; bly; strålskador; Slow Strain Rate Testing;

    Abstract : Among the structural materials under consideration for future lead-cooled fastreactors, special attention is paid to ferritic Fe-10Cr-4Al due to its superior corrosionand erosion protective properties, as well as its insensitivity to liquid metalembrittlement in liquid lead. This thesis gives an inside look into the radiation damageproperties of the alloy and the possible embrittlement scenarios. READ MORE

  3. 2. SSRT of 10-4 FeCrAl in LBE and Pb to Characterize Liquid Metal Embrittlement Effects

    University essay from KTH/Fysik

    Author : Daniel Stein; [2022]
    Keywords : Liquid Metal Embrittlement; Lead; Bismuth; Lead-Bismuth Eutectic; Slow Strain Rate Testing;

    Abstract : In this work the susceptibility of Fe-10Cr-4Al steel to liquid metal embitterment (LME)in low oxygen environment was investigated. slow strain rate testing (SSRT) wereconducted on 10-4 FeCrAl steel in a stagnant lead from 340-480◦C, lead-bismutheutectic (LBE) from 140-450◦C and lead-bismuth mixture at 375◦C with increasingbismuth content from 0. READ MORE

  4. 3. Influence of hydrogen on mechanical properties, microstructure and fracture surface of stainless steel 316L and stainless steel 304

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Mustafa Adnan Tawfeeq Salman; [2020]
    Keywords : Hydrogen embrittlement; stainless steel; microstructure; hydrogen charging; slow and fast strain rate.; Väteförsprödning; rostfritt stål; mikrostruktur; väte laddning; långsam och snabb töjnings hastighet;

    Abstract : Since hydrogen is an alternative energy source and has both economic and environmental benefits, it has received more attention. To use hydrogen a certain condition must be met, safe pressurized containers which are often made of metal. The metal isrequired due to the high mechanical strength and reasonable cost. READ MORE

  5. 4. Erosion-Corrosion experiments on Steels in liquid lead and Development of Slow Strain Rate testing rig

    University essay from KTH/Kärnenergiteknik

    Author : Petersson Christopher; [2019]
    Keywords : Liquid metal embrittlement; erosion-corrosion; slow strain rate testing-rig; alumina forming alloy; stainless steel; nuclear power; lead cooled reactors; slip.;

    Abstract : .... READ MORE

  6. 5. Erosion-Corrosion experiments on Steels in liquid lead and Development of Slow Strain Rate testing rig

    University essay from KTH/Fysik

    Author : Christopher Petersson; [2019]
    Keywords : ;

    Abstract : .... READ MORE