Essays about: "solar cell Si"

Showing result 1 - 5 of 22 essays containing the words solar cell Si.

  1. 1. Fabrication and characterization of GaAsxP1-x single junction solar cell on Si for III-V/Si tandem solar cell

    University essay from KTH/Tillämpad fysik

    Author : Elaheh Aghajafari; [2023]
    Keywords : III-V semiconductor; GaAsxP1-x heteroeputaxy; hydride vapor phase epitaxy; III-V Si solar cell; III-V halvledare; GaAsxP1-x epitaxiallager; hydridångfasepitaxi; III-V Si solcell;

    Abstract : Silicon based solar cells have been used as photovoltaic devices for decades due to reasonable cost and environment- friendly nature of silicon. But the conversion efficiency of silicon solar cell is limited; for instance, the maximum conversion efficiency of a crystalline silicon solar cell available in the market developed by Kaneka Corporation is 26 % [1]. READ MORE

  2. 2. Thin Indium Tin Oxide Layer Development for Crystalline Silicon/Perovskite Two Terminal Tandem Solar Cell

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : Aravind Srinivasachari; [2023]
    Keywords : Indium Tin Oxide; Thin-film characterisation; Magnetron Sputtering; Screen printing; Tandem Solar Cells; Indium-tennoxid; karaktärisering av tunnfilm; magnetronförstoftning; screentryck; tandemsolceller;

    Abstract : ITO is widely regarded as the optimal TCO for serving as front window layer in PSK/c-Si tandem solar cells. It is known to effectively mitigate several stability issues present in perovskite solar cells while demonstrating excellent lateral conductivities and optical transparency across the entire solar spectrum. READ MORE

  3. 3. Robust TCO’s for CIGS solar cells based on indium tin oxide

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Julia Nilsson; [2022]
    Keywords : photovoltaics; solar cells; thin film photovoltaics; PV; TCO; transparent conductive oxide; indium tin oxide; ITO; CIGS; solar power; sputtering; RF sputtering; radio frequency sputtering;

    Abstract : The increasing energy demand, combined with the use of harmful non-renewable energy sources calls for the search of alternative methods to cover our energy need.Renewable energy can be harvested in different ways, through the movement of wind and water, biomass, or directly from the rays of the sun, as in the case of photovoltaic (PV) devices. READ MORE

  4. 4. Recycling Waste Solar Panels (c-Si & CdTe) in Sweden

    University essay from Linnéuniversitetet/Institutionen för byggd miljö och energiteknik (BET)

    Author : Alireza Nekouaslazadeh; [2021]
    Keywords : PV panels; Environmental impacts; Economical impacts; c-Si; CdTe; Solar modules recycling center; Critical materials; Delamination; Material separation;

    Abstract : Solar energy industries are one of the fastest-growing industries in the global energy market. Between 2018 and 2019, installed capacity in Sweden increased by 70%. This is due to a combination of declining PV module and inverter costs, as well as  increased conversion to fossil-free energy production to mitigate greenhouse gas emissions. READ MORE

  5. 5. Intermediate layer contacts for tandem solar cells based on ALD SnO2

    University essay from Uppsala universitet/Institutionen för fysik och astronomi

    Author : Georgia Iona; [2021]
    Keywords : Ald; SnO2; tandem cell; solar cell; IML; intermediate layer;

    Abstract : In this project, samples with a metal/semiconductor/metal structure were fabricated and investigated with the potential application as the interconnecting layer of a tandem solar cell in mind. Degenerately doped p-Si and n-Si were used as bottom (metal like) contacts, as Si represents one of the most common materials for the bottom cell of tandem devices. READ MORE