Essays about: "tapping mode"

Showing result 1 - 5 of 6 essays containing the words tapping mode.

  1. 1. Developing a supervised machine learning model for an optimised aluminium addition based on historical data analytics, for clean steelmaking

    University essay from KTH/Materialvetenskap

    Author : Arun Kumar Thakur; [2022]
    Keywords : Clean steelmaking; Data analytics; De-oxidation; Machine learning; Ren ståltillverkning; Dataanalys; Deoxidation; Maskininlärning;

    Abstract : De-oxidation is an important process in clean steelmaking. Al (Aluminium) is mainly used as de-oxidant and controls the final oxygen content and impact the sulphur removal in steel. Adding optimum amount of Al is critical for steel cleanliness and to reduce cost. READ MORE

  3. 2. Importance of atomic force microscopy settings for measuring the diameter of carbon nanotubes

    University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

    Author : Anton Almén; [2019]
    Keywords : Carbon nanotubes CNTs ; Atomic force microscopy AFM ; diameter; height; tapping; frequency; phase; amplitude; setpoint; Kolnanorör; Atomkraftsmikroskopi AFM ; diameter; höjd; svängning; frekvens; fas; amplitud; börvärde;

    Abstract : Carbon nanotubes (CNTs) have gathered a lot of interest because of their extraordinary mechanical, electrical and thermal properties and have potential applications in a wide variety of areas such as material-reinforcement and nano-electronics. The properties of nanotubes are dependent on their diameter and methods for determining this using atomic force microscopy (AFM) in tapping mode assume that the measured height of the tubes represent the real diameter. READ MORE

  4. 3. Wireless Body Area Network for Patient Monitoring in Hospitals

    University essay from KTH/Skolan för informations- och kommunikationsteknik (ICT)

    Author : Divya Vinod Kalkotwar; [2016]
    Keywords : IEEE 802.15.4; wireless body area network; beacon mode; CSMA CA; NFC; patient monitoring.;

    Abstract : The master thesis is a prototyping project of a wireless body area network (WBANs) for patient monitoring in hospitals. The goal of this project was to study various technologies suitable for wireless body area networks, complete a requirement analysis, design a WBAN suitable to achieve the requirements and to test and evaluate the system against the requirements. READ MORE

  5. 4. Characterization of epitaxial graphene grown on silicon carbide

    University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik

    Author : Anton Jansson; [2014]
    Keywords : Graphene; epitaxial graphene; silicon carbide; SiC; 4H-SiC; 6H-SiC; sublimation; graphene manufacturing; AFM; atomic force microscopy; tapping mode; surface study; stepheight; charactarization;

    Abstract : In this thesis work several manufacturing methods for graphene is discussed followed by an indepth study of graphene grown by a high temperature sublimation method (sublimation of siliconcarbide). The graphene surfaces studied have been grown by Graphensic AB, both graphenegrown on the Si-face and the C-face of the silicon carbide were studied. READ MORE

  6. 5. Assessment of Power Production Possibilities in Two Sawmills in La Palma, Cuba

    University essay from KTH/Kraft- och värmeteknologi

    Author : Malin Fuglesang; [2012]
    Keywords : Power; electricity generation; sawmill; Cuba; bioenergy; renewable energy; gasification; asseradero; Cuba; electricidad; energía; gasificación; bioenergía; fuentes renovables;

    Abstract : The Cuban power sector with its heavy dependency on foreign oil is in much need of investment and development. In the past decade, the Cuban government launched an ‘energy revolution,’ the Revolución energética, which aims at generating electricity from renewable sources. READ MORE