Essays about: "tensile test with abaqus"

Showing result 1 - 5 of 25 essays containing the words tensile test with abaqus.

  1. 1. Validation of Finite Element Model of a Tetra Pak Package

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Warsame Mohamed Ali; Abdullahi Abdi Hashi; [2023]
    Keywords : Abaqus; HDPE; Package testing; Validation; Abaqus; HDPE; Pakettestning; Validering;

    Abstract : There is a high dependency on accurate finite element models in the packaging industry for concept selection, design and virtual validation of packages. One of themost used materials for these packages is High-Density Polyethylene (HDPE). Thismaterial is highly anisotropic, strain rate dependent and has different behavior intension and compression. READ MORE

  3. 2. Fatigue Crack Growth Analysis in Python algorithm with Finite Element Methods : Numerical Simulation of Fatigue Crack Growth

    University essay from Karlstads universitet

    Author : Hasan Majid; [2022]
    Keywords : ;

    Abstract : The goal of this thesis was to construct and develop a python-based finite element computer program for the evaluation of fatigue crack growth rate in notched metallic rods. The simulation was done by implementing elastic stress theory and linear elastic fracture mechanics techniques. READ MORE

  4. 3. Multiscale mechanical modeling of paperboard

    University essay from Lunds universitet/Hållfasthetslära; Lunds universitet/Institutionen för byggvetenskaper

    Author : Gustav Boman; [2022]
    Keywords : Paperboard; micromechanics; multiscale; fiber; X-ray; RVE; Technology and Engineering;

    Abstract : This thesis considers an investigation into the possibilities of creating a reasonably accurate multiscale material model for paperboard, with geometry based on X-ray scans of small paperboard samples. The modeling takes place in the software Multiscale Designer by Altair Engineering Inc. READ MORE

  5. 4. Effect of strain rate on continuum and pre-cracked polymer failure

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Pratik Rajesh Powar; Ashkan Raeisi; [2021]
    Keywords : DIC; LDPE; MCalibration; Polymer; Strain Rate;

    Abstract : The main intention of this thesis work was to investigate the effect of strain rate on continuum and pre-cracked polymer failure. Low-Density Polyethylene (LDPE) was chosen to study experimentally and numerically. In order to cover wide range of strain rates, four specific strain rates were selected for the uniaxial tensile tests. READ MORE

  6. 5. Characterization of thin laminate interface by using Double Cantilever Beam and End Notched Flexure tests

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Moiz Majeed; Rahitya Venkata Teja Geesala; [2020]
    Keywords : Double Cantilever Beam DCB ; End-Notched Flexure ENF ; Fracture toughness; Low density Polyethylene LDPE ; Three-point bending test;

    Abstract : This thesis is intended to identify the mode I and mode II fracture toughness to characterize the thin laminate interface by using the Double Cantilever Beam test (DCB) and End Notched Flexure test (ENF). This study’s thin laminate was Polyethylene Terephthalate and Low-Density Polyethylene (PET-LDPE), which is mostly used by packaging industries in the manufacturing of packages to store liquid food. READ MORE