Essays about: "thesis BiPV"

Found 3 essays containing the words thesis BiPV.

  1. 1. Technical performance evaluation of solar photovoltaic systems : A case study of eight PV systems on the Swedish market installed at RISE research facilities

    University essay from Mälardalens högskola/Akademin för ekonomi, samhälle och teknik

    Author : Awaz Sinan Rashid; Gulala Safari; [2021]
    Keywords : Building integrated photovoltaics; Building applied photovoltaics; Performance evaluation; Performance ratio; Specific energy yield; Module technology; Module temperature; Inverter size;

    Abstract : The main objective of this thesis was to evaluate the technical performance of eight small-scale PV (photovoltaic) systems on the Swedish market. Several parameters were measured for each system from June to November 2020. READ MORE

  3. 2. Building integrated photovoltaic (BIPV) modelling for a demo site in Ludvika based on building information modelling (BIM) platform

    University essay from Högskolan Dalarna/Energiteknik

    Author : Samer Quintana; [2018]
    Keywords : BIPV; BIM; Solar; Energy; 3D; Modelling; Building; Information; PV;

    Abstract : This thesis aims to design and simulate a building integrated photovoltaic (BIPV) system for three demo buildings in Ludvika, Sweden, which is part of the Energy- Matching’s project under the European H2020 research scheme. A literature review was firstly conducted in the area of energy scenarios, engineering tools, methodologies and the workflows in design and building energy modelling. READ MORE

  4. 3. Cooling integrated solar panels using Phase Changing Materials

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Benny Mårtensson; Tobias Karlsson; [2018]
    Keywords : Phase changing material PCM ; optimal working temperature; PV; solar panel; cooling solar panel; Fas ändrande material; optimal arbetstemperatur; Solceller; Kylning av solceller.;

    Abstract : In this master thesis, several cooling systems for PV-systems have been looked into by doing a smaller literature review and then a cooling module for a BIPV-panel was built out from the knowledge gathered. The cooling module used a PCM material separated into 12 bags and then placed in a 3x4 shaped pattern fastened to an aluminium plate that in turn was placed on the back of a PV-panel. READ MORE